JBL CSMA2120 8 input - 2 x 120W DriveCore Mixer-Amp, Fanless, 4ohm/ 8ohm/ 70V/ 100V

JBL CSMA2120 8 input - 2 x 120W DriveCore Mixer-Amp, Fanless, 4ohm/ 8ohm/ 70V/ 100V The JBL® CSMA series of Mixer-Amplifiers are a professional tool with a sleek industrial look that is designed and built for commercial sound applications. Utilizing Crown’s DriveCore technology enables significantly reduced size and weight – all mixer/amps are highly efficient, fanless and just 1U rack space high. There are both single channel and two channel models with four or eight mixer channels, respectively. The JBL CSMA2120 Commercial Series Mixer/Amplifier is a mixer/amplifier with one output channel and four mixer-channel inputs designed professionally for commercial and industrial use. JBL CSMA2120 is capable of reaching 120W of peak power with 15W per channel. For each channel, the unit's front panel sports is the volume controls, as well as a master volume adjustment bass, treble controls and knob, and a power switch. The volume controls are illuminated making them to be easily recognized and operate in darkened environments.The amplifier is capable of driving both four and eight Ohm loads, and can be also used with 70V and 100V distributed audio systems without the need for a separate transformer. On this JBL CSMA2120's back panel you'll find the speaker connections, the mic/line inputs, unbalanced RCA inputs and phantom power switches, and more. The unit is also equipped with a RJ45 connector for use with JBL CSR-V in-wall volume controls (available separately).This Commercial Series mixer/amplifier, JBL CSMA2120, it widely known for such features priority muting for channel one's input, a sleep mode which automatically powers down the unit when no audible signal has been received for longer than 30 minutes and voice activating ducking (useful for paging over background music). Also, you may connect to an additional amplifier, with an auxiliary output, though the tone and master volume will have no bearing on the resulting signal. JBL Commercial mixer/amps are manufactured under HARMAN’s GreenEdge™ environmental initiative, conforming to lead-free RoHS standards and utilizing recycled copper, aluminum and steel, an energy-saving powder coat finishing process and other environmentally-conscious manufacturing processes. Their highly efficient DriveCore design reduces power consumption and yields much more efficient operation – up to 80 percent more efficient than previous designs. All models carry a 3-year no-fault transferable warranty. Features 8 inputs with 2 outputs of 120-watts of power Ideal for commercial and industrial use Fanless, space-saving 1U design Sleek industrial look with illuminated rings, making them easy to see and operate Euro-block type mic/line input connectors and output connectors Independent Bass and Treble controls for each output channel Supports 70V and 100V distributed audio systems without the need for a separate transformer Remote volume control capability using JBL CSR-V module and standard Ethernet cable Priority muting Configurable output routing Utilizes Crown’s DriveCoreTM technology providing excellent audio performance with high efficiency Manufactured to lead-free ROHS standards, utilizing recycled metals, and using an energy-saving powder coat process Includes rack mounting kit Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment Energy Star® Certified Specification Maximum Output Power 120 W per channel into 4 Ohms or 8 Ohms, 1 kHz, ≤ 0.5% THD Insertion Loss 1 dB maximum for 70 and 100 V outputs Continuous Power 15 W per channel Line Output Level 5.0 V RMS into 10 kOhms Input Sensitivity To obtain full rated power at 8 Ohms (or 5 VRMS to line output)Mic Input: 3 mV RMSLine Input: 775 mV RMSRCA Input: 300 mV RMS Number of Channels Input: 8Output: 2 Frequency Response Measured at 2.83 V RMS into rated load impedance at any output4/8 Ohms Output: 20 Hz - 20 kHz, ±2 dB70 V/100 V Outputs: 80 Hz - 15 kHz ±2 dBLine Out: 20 Hz - 20 kHz, ±1 dB Total Harmonic Distortion (THD) Measured at 2.83 V RMS into rated load impedance at any outputPower Amplifier Output: <0.5%, 20 Hz to 20 kHzLine Output: 0.05% typical Signal to Noise Ratio > 90 dB Nominal Input Impedance Mic: 400 OhmsLine: 20 kOhms (balanced)RCA: 50 kOhms Minimum Load Impedance Low Impedance Output: 4 Ohms70 V Output: 40 Ohms100 V Output: 80 Ohms Crosstalk -70 dB @ 1 kHz Controls Front Panel:8 x Input level rotary knobs2 x Output volume-attenuating knobs1 x Power switch2 x Bass potentiometers2 x Treble potentiometers   Rear Panel:2 x Input-routing dip switches (including phantom and Hi-Z switches)8 x Mic/Line selector switch2 x Vox adjustment switches Indicators Front Panel:8 x Input signal presence ring, green2 x Output volume ring, green1 x Power switch ring, green/blue Connectors Rear Panel:1 x IEC power input2 x Aux out connection points6 x 3-pin euroblock connectors2 x 5-pin euroblock connectors6 x Dual RCA input connectors2 x RJ45, remote volume Operating Temperature / Humidity 32 to 95°F / 0 to 35°C, 95% RH (non-condensing) Storage Temperature -4 to 185°F / -20 to 85°C Phantom Power 27 VDC AC Input 100-240 VAC, 50/60 Hz Dimensions (W x D x H) 17.2 x 11.9 x 1.7" / 436.9 x 302.3 x 43.2 mm Weight Approximately 12.1 lb / 5.5 kg