Lectrosonics DSQD, DIGITAL 4 CHANNEL RECEIVER W/DANTE, 1/2 RACK

Descriptions Lectrosonics DSQD, DIGITAL 4 CHANNEL RECEIVER W/DANTE, 1/2 RACK The Lectrosonics DSQD is a Half Rack Receiver with analog and digital audio outputs utilizes the Lectrosonics signature digital architecture with remarkable audio quality and ultra-low latency. The Lectrosonics receiver also includes an extended operating range rivaling the best analog and Digital Hybrid Wireless® systems with continuously tunable tracking filters covering 470.100 - 614.375 MHz. In addition, the Lectrosonics DSQD antenna ports on the rear panel accept input from remote antennas, with a “loop-thru” output to another mainframe using the internal multicoupler. A kit is also available to mount antenna inputs (BNC connectors) on the front panel. Lectrosonics DSQD Main Features Four-channel, half-rack design Continuously tunable tracking filters covering 470.100 - 614.375 MHz Compatible with D2, DSW, Duet and Digital Hybrid Wireless® transmitters Built-in wideband antenna multicoupler with loop-thru for additional receivers Antenna bias power enabled from the front panel (fused and over-temperature protected) IR bi-directional port for transmitter setup Analog and Digital audio outputs with TalkBack (in applicable RX modes) Ethernet and USB interface Specifications System Wireless Transmission  Digital UHF Diversity  Antenna Diversity, Frequency, Ratio Diversity RF Frequency Band  470 to 608 MHz RF Bandwidth  138 MHz Frequency Step Size  25 kHz RF Channel Scanning  Auto-Scan Max Systems per Setup  100 Latency  2.5 ms Modulation  8FSK Receiver Form Factor  Rackmount Mounting Options  Rackmount (with Included Hardware) Rackmount Size  1 RU (1/2 Rack) Antenna  2 x External, BNC (Rear-Mount) Number of Audio Channels  4 Audio I/O  4 x XLR 3-Pin Male Balanced Output 1 x 1/4" TRS Female Unbalanced Headphone Output Audio Output Level  XLR Outputs: -35 to +8 dBu Frequency Response  20 Hz to 20 kHz Network I/O  2 x RJ45 (1 Gb/s) 1 x RJ45 Network Protocols  Dante USB/Lightning Connectivity  1 x Micro-USB (Host Connection) Approximate RF Sensitivity  -98 dBm Adjacent Channel Isolation  >85 dB Power Requirements  AC/DC Power Adapter AC/DC Power Adapter  7 to 18 VDC at 2.5 A (Included) AC Input Power  100 to 240 VAC, 50 / 60 Hz at 1.8 A Display & Indicators  1 x Backlit LCD (AF Level, Frequency, RF Level, Transmitter   Battery Status) 2 x LED Housing  Metal Dimensions  8.4 x 1.8 x 7.4" / 213 x 44.5 x 187 mm Weight  2 lb / 926 g