Lectrosonics M2R, BELTPACK DIGITAL STEREO IEM/IFB RECEIVER

Descriptions Lectrosonics M2R, BELTPACK DIGITAL STEREO IEM/IFB RECEIVER The Lectrosonics M2R bodypack receiver employs advanced antenna diversity switching during digital packet headers for seamless audio. This Lectrosonics M2R has a 24-bit digital audio stream that guarantees a high-resolution sound quality with a wide dynamic range, low noise floor, and rock-solid stereo image. The Lectrosonics M2R receiver can select from the stereo, mono from the left channel only, or mono from the right channel only, giving the unit flexibility in terms of the application. The headphone jack is fed from a high-quality stereo amplifier with 250 mW available to drive headphones or earphones to sufficient levels for stage performance or other environments with significant background noise. Also, it has a high-resolution, color LCD that allows for a broad range of menu options, including precise limiter settings, using detailed graphics. The Lectrosonics M2R runs on two AA batteries for an operating time of over 4 hours with alkaline cells. Lectrosonics M2R Main Features UHF IEM Receiver with Digital RF 24-Bit Digital Audio IR (Infrared) Port for Fast Setup High-Resolution, Color LCD Specifications M2R Specs Frequency 470.1 to 607.975 MHz Modulation Type 8 PSK with forward error correction, spread spectrum Occupied Bandwidth 200 kHz Latency Digital Source: 1.0 msAnalog Source: <1.4 ms Audio Inputs Selectable: 4 x analog audio ins or Dante Audio Performance Frequency Response 20 Hz to 15 kHz, -3 dB Total Harmonic Distortion (THD) + N 0.15% (1 kHz @ -10 dBFS) Dynamic Range >95 dB weighted Adjacent Channel Isolation >85 dB Diversity Type: Switched antenna Audio Output Earphone 250 mW at 32 Ohms Power Requirements 2 x AA batteries (3.0 V) Battery Life 2 x alkaline AA (4 hours)2 x lithium AA (7 hours) Power Consumption 1 W Dimensions (H x W x D) 3.0 x 2.4 x 0.625" (76.2 x 60.3 x 15.9 mm)Height is 4.7" (120 mm) with knob Weight 9.14 oz (259 g) with batteries