QSC MP-A40V 800W FlexAmp technology Hi-Z / Lo-Z amplifier, 4 x 200W AMPLIFIER
Description QSC MP-A40V 800W FlexAmp technology Hi-Z / Lo-Z amplifier, 4 x 200W AMPLIFIER The MP-A Series paging and music amplifiers build on a 50-year legacy of QSC amplifier quality and dependability. The MP-A Series is offering an incredible amount of flexibility for paging applications and business music, at the same time maintaining low total cost of ownership and high efficiency. Features FlexAmp Technology allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio Class-D output circuitry and switchmode power supply for high efficiency and low cost of ownership 1RU amplifier design for rack space savings Load selector for driving 4 Ω, 8 Ω, 70 V or 100 V on each channel Selectable 80 Hz highpass filter offered on each channel Power saving features - Auto-standby (after 28 minutes with seamless auto-ramp when signal returns) and remote standby input Amp status remote output Rock-solid QSC amplifier dependability Specification Specifications MP-A40V Channels 4 Power (all channels driven) 8 Ω 4 Ω 70 V 100 V 200 W200 W200 W200 W FlexAmp Technology Allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio Frequency response at 8 Ω 20 Hz – 20 kHz +/- 0.5 dB Signal to Noise > 103 dB Input sensitivity 1.23 V (+4 dBu) Gain at 8 Ω 30.0 dB Output circuitry Class D Input impedance >10k, balanced or unbalanced Maximum input level 12.3 V (+24 dBu) Cooling Type Operating temperature range Forced air cooling, thermally regulated fan speed, side/rear-to-front airflowMaximum: -10° - 50° C, recommended: 0° - 35° C, reduced performance above 40° C Connectors Input connectors Remote connectors Output connectors Four 3.5mm Euro, 3-pin (green) One 3.5mm Euro, 5-pin (black) Two 5.0mm Euro, 4-pin (green) Front panel indicators Power, signal (per channel), limit / mute / protect (per channel) Rear panel indicators Bi-Color LED signal / limit/ mute/ protect User-configurable operatingmodes (per channel) DIP switch selectable, low impedance 4 Ω or 8 Ω, high impedance direct drive 70 V or 100 V Remote I/O Remote standby, amplifier status enunciation on 3.5 mm connectors Highpass filter 80 Hz DIP switch engaged per channel Dimensions 1.75 in x 19 in x 14.8 in (44 mm x 483 mm x 377 mm) Net weight 9.3 lb (4.2 kg) Shipping weight 13.9 lb (6.3 kg) Power requirements Universal power supply (with active power factor correction), 100 – 240 VAC, 50 -60 Hz Agency approvals UL, CE, RoHS/WEEE compliant, FCC class B (conducted and radiated emissions) Carton contents IEC cable, quick start guide, connector pack