QSC SPA2-200 1/2 RU 2 Channel ENERGY STAR amplifier / Stereo Operation 200
Description QSC SPA2-200 1/2 RU 2 Channel ENERGY STAR amplifier / Stereo Operation 200 The QSC SPA2-200, for higher power, is a two channel amplifier designed to deliver up to 200 watts rms per channel into 4 or 8 ohms; the two channels is bridgeable to provide up to 400 watts rms into 4 or 8 ohms. The bridged channels are able to be switched into 70V or 100V direct drive mode that provide up to watts rms into a mono 70V or 100V output. An 80Hz highpass filter is engaged when in 70V or 100V mode just like the other SPA models. Features Up to 200 watts per channel into 4 and 8 ohms — the outputs of the SPA2-200 model are designed to provide up to 200 watts per channel into Low-Z loads. ENERGY STAR® qualified amplifier — The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost. Bridgeable outputs for higher power — Bridging the outputs of the SPA2-200 will deliver up to 350 watts into 70V or 100V when bridged. Auto-Ramp provides quiet startup and power-down — The ENERGY STAR auto-ramp circuitry ensures quiet and fast power up from standby and seamless power-down following 25 minutes of inactivity, dramatically reducing power consumption. Rack-mountable 1U, half rack width enclosure — The SPA amplifers can be mounted in 1 RU, 1/2 rack space, and their clever joining brackets enable easy under-table and wall-mounting Specification SPECIFICATIONS SPA2-200 Stereo Mode Watts Per Channel 8Ω dynamic, both channels driven 200 W 4Ω dynamic, both channels driven 200 W 8Ω & 4Ω 400 W 70V & 100v 350 W Signal to Noise (A weighted, 20 Hz-20 kHz) >100 dB Input Sensitivity 1.23 Vrms (+4 dBu) Maximum Voltage Gain 25.0 dB Ouput Circuitry Class D Frequency Response (20 Hz - 20 kHz) Frequency Response (20 Hz - 20 kHz) Input Impedance >10 kΩ (balanced), >10 kΩ (unbalanced) Maximum Input Level 12.3V (+24 dBu) Highpass Filter Switchable 80 Hz when Bridged in 70V & 100V Front Panel Indicators Power, per channel Signal, per channel Protect/Limit Controls 4Ω/8Ω/70V Bridge Highpass On/100V Bridged Highpass On per channel pair Dimensions (HWD) inches 1.7 x 8.7 x 9.5 / 1RU Dimensions (HWD) mm 43 x 220 x 241 / 1RU Weight (Net) 4.0 lb / 1.4 kg Weight (Shipping) 6.5 lb / 2.5 kg Agency Approvals UL, CE, ENERGY STAR, RoHS/WEEE compliant, FCC Class B (Conducted and Radiated emissions), UL 2043 witd PL-Kit Carton Contents Power cable, quick start guide, connector kit, rack mount ears, mounting brackets