RCF TT1-A-II Active 10" 2-way Power Speaker 800 Watts

RCF TT1-A-II Active 10" 2-way Power Speaker 800 Watts The RCF TT1-A-II is professionally designed capable of providing an extremely high-power output of 131 dB SPL max that comes along with low distortion in a vented two-way enclosure. The two-channel, class D power amplifier is yielding a total power output of 800 W RMS along with FiRPHASE 0° linear phase DSP processing, a complete set of protection circuitry and onboard RDNet intended for use in remote control and monitoring. The speaker comes featuring a neodymium 10” woofer and a 3,0” voice coil, titanium dome compression driver on a large, 90° x 60° constant directivity horn. 131 dB max SPL 800 W Class-D two-channel amplifier 90° x 60° constant directivity coverage FiRPHASE for 0° phase response Heavy-duty touring cabinet 32 bit - 96 kHz processing RCF RDNetNETWORKED CONTROL AND MUCH MORERDNet is a professionally designed robust management network and control platform intended for use in small, medium and large arena-sized sound systems, as well as complex and extended installations. Based on a proprietary network protocol, RDNet is capable of providing an intuitive control and monitoring of every connected device/object in the RCF audio system. Each device comes along with DSP for addressing the specific presets or modifications of parameters to single or groups of objects. A network user is possible to change level, delay, EQ (linear phase FiR as well) and other settings, that includes advanced subwoofer configurations. RDNet is not only designed for loudspeakers—you are made capable to control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers. STATE OF THE ART CLASS-D AMPLIFIERSTwo-channel Class-D amplifier that comes along with 800W total power output for an exemplary performance operating along with high efficiency into a lightweight solution. TT+ amplifiers are capable of delivering an ultra-fast attack, realistic transient response, and impressive audio quality. ENGINEERED FOR MAXIMUM RELIABILITYThe amplifier housing is tightly fitted and sealed to the rear of the cabinet. A recessed and protected panel houses the connections for power, signal and control. INPUT BOARDThe analog input board is fully featured offering XLR input and output link, preset selections, and a pre-loaded equalization bypass switch. EtherCON input and output connect the system in a daisy chain topology for RDNet networked management. REAR PANELThe rear panel features a simple rotary encoder with a push switch that controls all speaker functions. A bright display helps the system setting. The only switch on the panel sets local or remote control. A simple command from RDNet totally disables the input panel. HIGH-END PROCESSINGThe amplifier is incorporating a low noise 96 kHz, 32-bit floating-point DSP circuitry for computing FiRPHASE, soft clipping limiters, RMS limiters, polarity, amplitude, timing, and equalization. All the control settings, monitoring of each component and other advanced features are integrated in the RDNet Networked Management software. DURABLE AND STURDYThe cabinets are made featuring a recessed die-cast aluminium side handles powder coated along with rubber hand-grip, designed capable of facilitating transport positioning and loading operations. A bottom pole socket allows the use of the speaker as a point source speaker on a stand or subwoofer pole. A variety of rigging options is available, between six Flying Tracks eyelet mounting rail on the upper and lower sides and four lateral Quick-Fit rigging points. WEATHERPROOF CABINETThe speaker cabinet is made of high-quality Baltic birch plywood with a special adhesive to glue every layer; this makes the cabinet completely water-resistant even before the special polyurea paint, applied to create a very thick full coating of the cabinet, making the speaker highly resistant to scratches, bumps, sun, and extreme weather conditions. HEAVILY BRACED INTERNAL STRUCTUREThe internal structure is heavily braced to survive long term use and transportation. All the parts are assembled on metal inserts with metric screws. The amplifier is housed in a separate chamber from the transducers to offer the best efficiency and reliability. NEW PERSPECTIVE ON LINEARITYRCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener. The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system. Specifications Acoustical specificationsFREQUENCY RESPONSE:55 Hz ÷ 20000 Hz MAX SPL @ 1M:131 dB HORIZONTAL COVERAGE ANGLE:90° VERTICAL COVERAGE ANGLE:60°Transducers COMPRESSION DRIVER:1 x 1.4'' neo, 3.0'' v.c WOOFER:10'' neo, 3.0'' v.c Input/Output section INPUT SIGNAL:bal/unbal INPUT CONNECTORS:XLR OUTPUT CONNECTORS:XLR INPUT SENSITIVITY:+4 dBu Processor section CROSSOVER FREQUENCIES:900 Hz PROTECTIONS:Thermal, RMS LIMITER:Soft Limiter CONTROLS:Gain reduction, RDNet local setup/bypass, time delay, Presets (linear, close, far listening, High - Pass), RDNet on board RDNET:Yes Power section TOTAL POWER:1600 W Peak, 800 W RMS HIGH FREQUENCIES:500 W Peak, 250 W RMS LOW FREQUENCIES:1100 W Peak, 550 W RMS COOLING:Convection CONNECTIONS:Powercon IN/OUT Standard compliance CE MARKING:Yes Physical specifications CABINET/CASE MATERIAL:Baltic birch plywood HARDWARE:Installation/Rental fittings HANDLES:2 side POLE MOUNT/CAP:Yes GRILLE:Steel COLOR:Black Size HEIGHT:566 mm / 22.28 inches WIDTH:333 mm / 13.11 inches DEPTH:370 mm / 14.57 inches WEIGHT:25.4 kg / 56 lbs Shipping informations PACKAGE HEIGHT:690 mm / 27.17 inches PACKAGE WIDTH:480 mm / 18.9 inches PACKAGE DEPTH:430 mm / 16.93 inches PACKAGE WEIGHT:28 kg / 61.73 lbs