Tannoy CMS503DCLP 5" Full Range Ceiling Loudspeaker with Dual Concentric Driver
Description Tannoy CMS503DCLP 5" Full Range Ceiling Loudspeaker with Dual Concentric Driver (Low Profile) [Priced Individually, Sold in Pairs] The CMS 503DC LP is a professionally designed full bandwidth 240-Watt high sensitivity loudspeaker that is capable to utilize the Tannoy's third generation Ceiling Monitor System technology (CMS 3.0). Give all the credits to an all-new proprietary 5" Dual Concentric point-source driver that comes along with Omnimagnet technology on a Torus Ogive Waveguide, the UL certified CMS 503DC LP is capable to deliver a wide and consistent broadband directivity along with enhanced intelligibility -plus highly accurate and linear response. Optimized for InstallationSpecifically designed along with a 4 way self-aligning clamp system designed for fast, simple and cost effective installation, CMS 503DC LP comes featuring an ultra-shallow back can intended for use in applications where cavity space is limited and a removable locking screw terminal connector that comes along with loop-thru functionality. A low-insertion loss 30 W transformer that comes with convenient front panel tap switching, paintable powder coated steel mesh grille that comes along with dust protection, two tile support rails and one C-ring are all included. An Arco style grille, which is concealing the entire unit intended for aesthetic purposes and plaster (mud) ring are available separately. LAB GRUPPEN ReadyThe CMS 503DC LP is finished in semi matt white and optimized for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel. Features Full range ceiling loudspeaker for installation applications 60 Watts continuous, 240 Watts peak power Next generation 5" Dual Concentric driver featuring Omnimagnet technology Torus Ogive waveguide for improved high frequency response and directivity Ultra-shallow depth profile for applications where cavity space is restricted UL 1480 certified for general signalling systems UL 2043 certified for air-handling spaces Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input Low insertion loss 30 W line transformer with easily accessible tapping switch Optimized for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel Semi matt white finish fits unobtrusively in any environment Powder coated UV resistant perforated steel mesh grille with dust protection Removable magnetic grille for custom painting Optional ARCO designer grilles available for minimal architectural impact Self-aligning 4 way clamp mounting system Mounting C-ring and ceiling tile rails included Specifications Applications Applications Voice Alarm SystemsMultizone Foreground Music & Paging SystemsBoardrooms & OfficesBusiness Music SystemsAirports, Convention Centers, HotelsReception / Waiting RoomsHouses of WorshipRetail Outlets / Shopping MallsLounges / BarsCruise ShipsCourtrooms Performance Frequency response (-3 dB) 88 Hz - 22 kHz Frequency range (-10 dB) 77 Hz - 24 kHz System sensitivity (1 W at 1 m) 89 dB (1 W = 4 V for 16 Ohms) Nominal Coverage Angle 90 degrees conical Power Handling Average: 60WProgramme: 120WPeak: 240W Recommended Amplifier Power 120 W at 16 Ohms Nominal Impedance (Lo, Z) 16 Ohms Rated maximum SPL Average: 107 dBPeak: 113 dB Transformer Taps-via front rotary switch 70V: 30 W (165 Ohms) / 15 W (330 Ohms) / 7.5 W (660 Ohms) / 3.75 W (1320 Ohms) / OFF & low impedance operation100V: 30 W (330 Ohms) / 15 W (660 Ohms) / 7.5 W (1320 Ohms) / OFF & low impedance operation Transducers Dual Concentric point source driver 1x 5" (12.70cm) Dual Concentric driver, using Omnimagnet technology Low Frequency 1.38" (3.51cm) voice coil, treated multi fiber paper pulp cone High Frequency 0.79" (2.01cm) PEI dome Physical Backcan Zinc plated steel Baffle Reflex loaded UL 94V-0 rated ABS Grille Steel, with weather resistant coating Safety Functions Safety ring located at rear of enclosure for load bearing safety bond Clamping Design Security toggle clampMin / Max clamping range 0.37" (0.94cm) /2.36" (5.99cm)Recommended clamp torque: 1.5 Nm Cable Entry Options Cable clamp & squeeze connector for conduit up to 22 mm Connectors Removable locking connector with screw terminals with "loop through" facility Compliance UL-1480, UL-2043, CE Dimensions Bezel diameter: 10.79" (27.41cm)Front of ceiling to rear of backcan: 3.88" (9.86cm)Hole cutout diameter: 9.96" (25.30cm) Weight 3.3kg (7.28 lbs)