TANNOY CVS 4 MICRO 4" Coaxial In-Ceiling Loudspeaker with Shallow Back Can for Installation Applications (CVS 4 MICRO)

TANNOY CVS 4 MICRO 4" Coaxial In-Ceiling Loudspeaker with Shallow Back Can for Installation Applications (CVS 4 MICRO) The CVS 4 MICRO is a shallow back can ceiling loudspeaker, delivering 160 Watts of compact yet robust audio performance suitable for various settings like restaurants, hotels, houses of worship, and diverse business environments. Its capabilities in power handling, frequency response, and low distortion emulate those of a studio reference monitor rather than a standard ceiling loudspeaker. The sound it produces is warm, carrying nuanced and crystal-clear clarity that immerses the listener without being intrusive. Exceptional Sound and Reliability The CVS 4 MICRO boasts a 100 mm (4.00") mid-bass driver with a coaxially mounted 19 mm (0.75") high-frequency section housed in a vented, paintable front baffle made from UV/weather-resistant UL94V-0 ABS material. Its mineral-loaded polypropylene cone and nitrile rubber surround ensure durability and long-term reliability. With a shallow back can depth of less than 4" (98.3 mm), this speaker is an ideal fit for scenarios where space above the ceiling is restricted, yet exceptional sound quality and reliability are essential Comprehensive Installation Package The CVS 4 MICRO comes with an integral zinc-plated steel shallow back can, including a recessed termination box, addressing most installation application needs. Its removable locking connector features secure screw terminals for wire termination and a “loop through” capability. Additionally, strain relief is ensured via a clamping mechanism suitable for plenum-rated cables or conduits. The inclusion of security toggle clamps enables swift and easy installation, complemented by two tile support rails and one C-ring within the package. Furthermore, an optional plaster (mud) ring is available as an accessory for added customization. Product Features Coaxial full range low profile ceiling loudspeaker for installation applications 40 Watts continuous, 160 Watts peak power Shallow back can for limited cavity space 4" mineral-loaded polypropylene driver with nitrile rubber surround for enhanced durability and long-term reliability 0.75" ferrofluid cooled soft dome neodymium high-frequency driver Wide constant directivity dispersion for optimum coverage UL 1480 certified for fire-protected signalling systems UL 2043 certified for air-handling spaces UV and weather-resistant UL 94 V-0 ABS front with plated steel fire can enclosure Multiple transformer taps for 70 V and 100 V line systems or 6 Ohm direct input Low insertion loss 15 W line transformer with easily accessible tapping switch Semi matte white finish fits unobtrusively in any environment Powder-coated perforated steel mesh grille with dust protection Mounting C-ring and ceiling tile rails included Phoenix connector with steel cover and strain relief clamping mechanism for fire-rated cable Specifications System Frequency response (-3 dB)* 110Hz - 19kHz Frequency response (-10 dB)* 90Hz - 22kHz System Sensitivity (1 W @ 1 m)** 87 dB (1 W = 2.45 V for 6 Ohms) Nominal Coverage Angle 90 degrees conical Coverage Angle (1 kHz to 6 kHz) 102 degrees Directivity Factor (Q) 5.6 averaged 1 kHz to 6 kHz Directivity Index (DI) 7.1 averaged 1 kHz to 6 kHz Rated Maximum SPL 103 dB (average)109 dB (peak) Power Handling*** Average: 40 W Programme: 80 W Peak: 160 W Recommended Amplifier Power 80 W @ 6 Ohms Nominal Impedance 6 Ohms Transformer Taps (via front rotary switch) 70 V: 15 W / 7.5 W / 3.75 W / 1.9 W / OFF & low impedance operation 100 V: 15 W / 7.5 W / 3.75 W / OFF & low impedance operation Transducers Low Frequency 100 mm (4.00") mineral loadedcone material High Frequency 19 mm (0.75") Physical Enclosure Back can: Zinc plated steel | Painted steel Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating Safety Features Safety ring located at rear of enclosure for load bearing safety bond Clamping Design Security toggle clamp Back Can Options Cable Entry Options Cable clamp & squeeze connector for conduit up to 22 mm Connectors Removable locking connector with screwterminals with “loop through” facility Safety Agency Ratings UL-1480, UL-2043, CE Hole Cutout Diameter 180 mm (7.08") Dimensions Bezel diameter 213.0 mm (8.39") Front of ceiling to rear of back can 202.5 mm (7.97") Front of ceiling to top of safety loop 214.9 mm (8.46") Optional Accessories Plaster (mud) ring * Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber** Unweighted Pink noise input, measured at 1 m on axis*** Long term power handling capacity as defined in EIA - 426B test