Telex RTS BP-6000 Universal 2-Channel Beltpack for Audiocom and Clear-Com Systems

Telex RTS BP-6000 Universal 2-Channel Beltpack for Audiocom and Clear-Com Systems Introducing the versatile Telex RTS BP-6000, a universal two-channel belt pack that brings easy configuration and customizable functionality to your fingertips. Perfect for producers, coordinators, and team members in broadcast, house of worship, and live stage applications using Audiocom or Clear-Com party line systems. This belt pack's low current draw means that one power supply can handle more beltpacks, making larger setups more cost-effective. Experience automatic configuration based on the connected system and auto-sensing of dynamic and electret headsets via the XLR 4-pin male jack. Let the voice prompts guide you through the menus, simplifying the configuration process. Enjoy easy-to-use controls, including level, channel select, call, and a programmable talk button. The remote mic kill function reduces distracting background noise by disabling all active mics. With LED indicators for the selected channel, as well as call and talk status, you'll always stay connected. The bottom panel features Switchcraft 6-pin jacks for line and loop connections, while the integrated belt clip ensures secure attachment to the wearer without tape or a touch-fastener. Upgrade to the Telex RTS BP-6000 for seamless communication and ease of use. Features Compatible with Audiocom and Clear-Com party line systems Mode-sensing configuration allows the headset to detect the type of system connected and configure itself accordingly Switchcraft 6-pin line and loop connectors XLR 4-pin male headset connector automatically senses dynamic and electret headset microphones Dedicated button and LED indicators for selection of channel one or two Dedicated button and LED indicator for call function Programmable talk button supports always on, always off, switched, or momentary functionality Voice prompts simply configuration by guiding you through menus Remote mic kill turns off all active microphones to reduce background noise Reduced current draw allows more beltpacks to be powered from the same power supply Specifications Input Line Connector 1 x XLR 6-pin female Headset Connector 1 x XLR 4-pin male Loop Output Connector 1 x XLR 6-pin male Impedance Terminating, Balanced: 300 OhmsTerminating, Unbalanced: 200 Ohms Bridging Impedance >10 kOhms unbalanced Additional Requirements Dynamic Headset Impedance: 50 to 200 OhmsElectret Headset Impedance: 1 to 13 kOhmsHeadphones: 50 to 600 Ohms Output Level 0.0 dBu nominal Maximum Output Power Headphone Amplifier: >140 mW into 150-Ohm load Frequency Response 200 Hz to 8 kHz (±2 dB) Audible Call Alert 1 kHz Sidetone >20 dB dynamic range Crosstalk < -60 dB Noise < -60 dB Total Harmonic Distortion < 1.0% Operating Frequencies Call Signaling, Balanced: 20 kHzCall Signaling, Unbalanced: DC onlyMic Off, Balanced: 24 kHz Maximum Operating Current 50 mA unbalanced55 mA balanced DC Current Requirements 18 to 33 VDC Controls and Indicators Controls: Call, talk, channel, and volumeIndicators: Call, talk, and channel Operating Temperature 32 to 131°F / 0 to 55°C Storage Temperature -4 to 158°F / -20 to 70°C Operating Humidity 5 to 95%, non-condensing Storage Humidity 15 to 90%, non-condensing Dimensions 3.7 x 1.3 x 4.7" / 95.2 x 34.2 x 119.2 mm (without belt clip and top panel)3.7 x 1.6 x 4.8" / 95.2 x 39.4 x 121.6 mm (with belt clip and top panel) Weight 13 oz / 369 g