Yamaha EMX2 Powered 10 Channels Mixer

Yamaha EMX2 Powered 10 Channels Mixer The Yamaha EMX2 Powered mixer is a 10-input mixer with an integrated 500W amplifier, four mic/line inputs, three stereo line inputs, and an independent monitor bus. The EMX2 Powered mixer features a Hi-Z guitar input on channel four and each channel of this EMX2 Powered mixer offers a 3-band EQ for custom tailoring your sound. Channels 1/2 offer XLR inputs, while channels 3/4 include an XLR-1/4" combo jack. Channels 5 through 10 provide 1/4" inputs, with channel 7/8 offering an additional set of stereo RCA inputs. Channel 9/10 also includes a 1/8" stereo mini-jack for connecting portable music players. The EMX2 Powered mixer includes an integrated feedback suppressor and built-in reverb with SPX series algorithms. Additionally, the EMX2 Powered mixer offers a Master EQ, which produces a single knob to control the level of low end. At the far left, the speech setting cuts low frequencies, while the middle position is neutral for music playback. The far-right setting produces a Bass Boost to improve music playback. There are a number of optional accessories available including a footswitch for reverb bypass, a rack-mount kit, and a microphone stand adapter. The EMX2 Powered mixer ships with a standard IEC power cord. The Yamaha EMX2 Powered Mixer Product Highlights Integrated 500 W Power Amplifier Four Mono Mic/Line Inputs Three Stereo Inputs Hi-Z Input on Channel 4 Independent Monitor Output 3-Band EQ on Each Channel Master EQ for Music Playback or Speech Integrated Feedback Suppressor Built-In Reverb Compatible with 4 and 8 Ohm Speakers Easy Does It Because the EMX2 is both a mixer and a power amplifier, you only need speakers and mics to have a fully functioning sound system. This makes it easy for newcomers, and even first-time users with no previous audio experience to easily configure their own sound reinforcement system. The EMX2's all-in-one design concept ensures that by just plugging in a single power cable and making a few simple, intuitive connections, anyone can be their own sound engineer. Specifications Output Power - 1 kHz THD+N < 10% (CEA2006): 250 W + 250 W (4 Ohms), 170 W + 170 W (8 Ohms)1 kHz THD+N < 1%: 110 W + 110 W (4 Ohms), 110 W + 110 W (8 Ohms) Frequency Response - Frequency Response Refer to the nominal output level @ 1 kHzInput to Speakers: +1/-4 dB (40 Hz to 20 kHz)Input to Monitor Out: +0.5/-1.5 dB (20 Hz to 20 kHz) THD + N - Input to Speakers: 0.2% @ 13.8 W (40 Hz to 20 kHz), 0.4% @ 23.2 W (1 kHz)Input to Monitor Out: 0.05% @ +10 dBu (20 Hz to 20 kHz), 0.009% @ +20 dBu (1 kHz) EIN - Equivalent Input Noise: -115 dBu Residual Output Noise - Input to Speakers: -68 dBu (40 Hz to 20 kHz, Master: min) Input to Monitor Out: -99 dBu (20 Hz to 20 kHz, Monitor: min) Crosstalk - (1 kHz): -80 dB Input Channels - Mono (Mic/Line): 4                             Stereo: (Line): 3                             Total: 10 Output Channels - Speakers: L/R                                Monitor Out: L/R                                Subwoofer Out Bus - Stereo: 1          Bus: 1 Pad - Channels 1-4: 26 dB Hi-Z Input - Hi-Z Input EQ Section - High: 8 kHz +15/-15 dB                      Mid: 2.5 kHz +15/-15 dB                      Low: 100 Hz +15/-15 dB Audio Level Meter - 6 points (-20, -6, 0, +3, +6, LIMITER) Built-in Effects - SPX Algorithm: Reverb 4 programs Output Channel Function - Master EQ (Speech to Music)                                              Feedback Suppressor Phantom Power - Channels 1, 2: +30 V Footswitch Input - Reverb: Effect mute on/off Protection - Load Protection: DC-faultAmplifier Protection: Over heat protection, over current protection Power - Power Requirements: 100-240 VAC, 50/60 Hz              Power Consumption: 35 W (Idle) / 90 W (1/8 power) Operating Temperature - 32 to 104°F / 0 to 40°C Dimensions (W × H × D) - 14.8 x 5.8 x 8.7" / 37.6 x 14.7 x 22.1 cm Weight - 9.3 lb / 4.2 kg