Yamaha XMV8140 70 Volt Commercial Multi-Channel Power Amplifier 8 x 140 watts

Yamaha XMV8140 70 Volt Commercial Multi-Channel Power Amplifier 8 x 140 watts The power amplifier of Yamaha XMV8140 can operate in both high-impedance (70V/100V line) or low impedance (4Ω/8Ω) modes at the same instant, excluding the need for additional equipment, as well as streamlining the installation process. Installed sound applications often demand both high and low impedance connectivity in the same venue, requiring separate, dedicated amplifiers or an external transformer. Also enables both 70V and 100V operation The power amplifier of Yamaha XMV8140 can also enable both 70V and 100V operation for every pair of channels by easily selecting the preferred mode using the dip switches on the rear panel of the Yamaha XMV8140. High impedance operation often requires the use of two combined channels in bridge mode, but with Yamaha XMV8140 amplifier, 70V or 100V mode can be assigned to every pair of channels without affecting the number of output channels. Protection features for more reliable operation There is an essential part of Yamaha XMV8140 design and that is the Automatic protection function it ensures peak performance and reliable operation in less than ideal situations. Low load impedance, overcurrent, and overheating can all damage vital parts of amplifier components and threaten their ability to function effectively. To prevent these dangerous hazards, The Yamaha XMV8140 power amplifier features powerful and intelligent functions that can deliver the assurance of long product life and consistent performance. A comprehensive line-up to power your sound solutions XMV Series multi-channel power amplifiers combine Class-D efficiency with features designed specifically to benefit commercial installation sound systems. The Series is comprised of 8 different models with varying output power capabilities and flexible in/out connectivity to accommodate a wide range of installation environments. Specifications General specifications Output power 1kHz (THD+N=1%: 4Ω) - 140W x 8 1kHz (THD+N=1%: 8Ω) - 140W x 8 1kHz (THD+N=1%: 4Ω / Double Power Mode - 280W x 4 1kHz (THD+N=1%: 8Ω / Double Power Mode) - 280W x 4 High impedance: 100V line - 125W x 8 / 80 Ω High impedance: 70V line - 125W x 8 / 40 Ω Voltage Gain RL=8Ω - 28.7dB RL=8Ω / Double Power Mode - 31.7dB 100V - 38.2dB 70V - 35.2dB Power consumption - 1/8 power (4 Ω pink noise):250W, Idle (4 Ω):73W, Standby:23W Total harmonic distortion - ≤ 0.2% (1kHz, half power) Frequency response - 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) S/N ratio - ≥ 100dB(A-weighted) Crosstalk - ≤ -60dB Input sensitivity - +4dBu Input impedance - 20kΩ (balanced), 10k Ω (unbalanced) I/O Connectors Analog I/O - Input: Euroblock x 2 (6P, balanced) Digital I/O - RJ45 x 2 (YDIF IN / OUT) Speaker Output - Barrier strip x 8 pairs Control ports - Remote, Fault Output : Euroblock (3P) x 1 Network - RJ45 x 1 Others - AC Inlet x 1 Input Level - +24dBu (Maximum) Protection circuit Load protection - POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting Amplifier protection - Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) Power supply protection - Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C), Integrated power: Gain reduction (Restored automatically) Cooling - 3-Speed fan x 2, front-to-back airflow Power requirements - 100V, 120V, 230V-240V; 50Hz/60Hz Dimensions W - 480mm (18.9") Dimensions H - 88mm (3.5") Dimensions D - 422mm (16.6") Net weight - 10.1kg (22.3lbs)