infinaware - Replacement Real Carbon Fiber Dashboard for Tesla Model 3/Y

【Fitment】TIPS:Only applicable to 2020-2023.5 Tesla model 3&Y.This Dashboard trim is not suitable for Tesla after May 2023, please confirm before placing an order.When the two ends are too short after installation, you can tear off the tape on the back of the two ends before installation, and then use adhesive auxiliary instead of adhesive when installing the two ends. 【3K Carbon Fiber】Dashboard Cover Wrap of the Carbon Fiber is made of the most costly Japan 3K carbon fiber Cloth, which is completely different from traditional ABS material, this material was previously widely used in aerospace and now widely used in various fields. It's resistant to corrosion, and clear lines and long service life. 【Perfect Matching】The carbon fiber dashboard cover wrap is made by 1:1 mold casting based on the original data of Tesla Model 3&Model Y,high standard alignment, consistent radian, and carefully polished to avoid scraping the paint and affecting the original vehicle function, great accessories to perfect your Tesla. 【Easy To Install】Tesla model y/3 dashboard cover use 3M self adhesive tape,which is firmly installed and not easy to fall off. Non destructive installation and non damage the original vehicle. First, clean the surface of the car, compare the installation position, then tear off a little 3M adhesive and stick on the original dash. Finally, pull off the remaining adhesive and press firmly to complete the installation. 【Installation Tips】We recommend that you clean your Carbon Fiber Dash Cover for Model Y/3 before installation, make sure the tesla dashboard cover wrap is clean and dry, then you should gradually squeeze from the middle to the edge until the Front door trim panel caps is tightly fitted with the original car.