Canam Commander Denali UTV Plow System
CANAM COMMANDER DENALI STANDARD UTV PLOW PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System Snow doesn't stand a chance against DENALI Pro UTV Snow Plows. Designed in the USA, these heavy duty, County-style 12-gauge steel UTV plow blades make quick work of powder and wet snow. The center mounted design disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact. The plow kit includes a reversible wear bar, rubber flap, and skid feet to protect the blade from wear and tear. Dual-layer powder & Polyester paint coat boosts corrosion protection and UV resistance, keeping you plowing for seasons to come. Please Note:All DENALI Snow Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, VIPER Max, or VIPER Midnight winch with an automatic brake. Kit Contents: UTV Snow Plow Blade - Straight Pushtubes Wearbar Skid Feet Installation Hardware and Instructions Blade Features: Snow Plow Blade (19 inches scoop) and leading horizontal supports are formed from a single piece of 11 gauge steel Four 7 gauge ribs run the full height of the blade Three additional 7 gauge horizontal stabilizers support the deepest point of the blade 65° attack angle and over center design ensures snow rolls up and is thrown forward Replaceable 7gauge steel wear bar included with every kit Height and angle adjustable skid feet included 3 Year Warranty Pushtube Features: Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength Turn system allows for easy positioning of the blade in 5 different angles - 0, 12.5°, 25° Simple detachment system with the pull of a pin Structural tube steel cross bar for added lateral rigidity Quick release pins included 13.5 inches center to center for plow mount tabs Pushtube Lift Kits allow plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground Lift Kits are for use with DENALI UTV Standard Pushtubes only (NOT Extended Pushtubes) Extended Push Tubes are designed to be used with SxS/UTVs that have tracks Optional Hydroturn Features: PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid Change the blade angle while driving; full radius turn in just 10 seconds Heavy duty chrome plated ¾″ cylinder shaft No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes Wire harness utilizes weatherproof connectors Optional Plow Pulley Fairlead Features: Roller Replaces the winch fairlead during the plow season For use with Steel AND Synthetic cables Curved cable groove helps eliminate flattening and breaking of cable Bolt Patterns: Standard Spool: 3″ x 4.875″ Wide Spool: 3" x 6.67″ Sheave Includes pulley, 1/4″ clevis hook and nylon strap Allows greater precision when raising/lowering plow blade and increases the angle of pull Cable 12′ length, 1/4″ diameter Single braid, dyneema rope with galvanized steel thimble/eyelet