Add Brakes to Your Trailer Complete Kit 3500 Axle 5 x 4.5 Electric Never Adjust (82475-C-FSA-DEX)

Complete Add Brakes to Your Trailer Kit with a  5 x 4.5 Bolt Pattern and Genuine Dexter Never Adjust Backing PlatesPart#: 82475-C-FSA-DEX Complete Trailer Brake Setup, with drums, seals, Brake shoes, Bearings, new hardware, backing plates, Battery Break Away, EVERYTHING for one axle! for 3500# axles from Dexter, AL-KO, AXIS, Quality, and others! Measurements from Center Bolt Hole to Center Bolt Hole is 2 7/8" on Backing Plate. In order for these brakes to work, you must have a brake controller and a 7 way plug installed in your truck Benefits of Never Adjust Backing Plates- Eliminates brake adjustments - Brakes automatically adjust to deliver optimum performance and braking power - Reduce stopping distances 50 percent more than other brakes If you have a trailer without brakes, and you want to add them, this kit has EVERYTHING you will need. This kit fits standard 3500# axle, either Spring or Torsion, EZ lube or Standard. Most 5 bolt wheel trailers are 3500# axles. (does yours have a 2-3/8" axle tube?) Some small trailers (usually with small tires and a 1-5/8" axle tube) will have the smaller spindles, and for those you will need a smaller (or larger) brake kit. Look at the measurements below if you are not sure. Measurements from Center Bolt Hole to Center Bolt Hole is 2 7/8" on Backing Plate This Kit Includes:  TWO - Genuine Dexter Never Adjust Brake backing plates, 3500# per pair, 10" x 2.25, one left, one right    Left Hand Part Number: 023-468-00        Right Hand Part Number: 023-469-00 TWO - New 10" brake drums, 5 x 4.5" bolt pattern with races already pressed in     Part Number: 008-247-05    All hardware to attach backing plates to axle mount plate (special 7/16 nuts).All brake hardware, springs, levers, magnets, shoes, etc.New inner grease sealsAll New Wheel Bearings (Shipping loose with kit):TWO - 1.71" 10-19 sealsTWO - 1-1/16" bearings    Part Number: L44649TWO - 1-3/8" bearings        Part Number: L68149TEN - Matching lug nuts, 1/2-20TWO - New 1.98" EZ Lube Dust Caps    Part Number: 021-041-02 and 085-001-0025' Ft of 14 Gauge Two Conductor High Tempature Brake Wire (Enough for a 23 ft long trailer!)Assorted wire connectors and wire ties (Everything you need!)4.5 Amp Hour, 12 Volt Gel Cell Rechargeable break away battery with built in battery chargerBattery Case to mount to trailerPull pin emergency break away switchNew 7 Way Trailer Plug In addition, you should see a small square plate welded to the axle tube, with 4 holes, (to bolt the brake plate to) and your axle tube will be about 2 1/4" OD. If you have a 2.75" axle tube, it is the larger 5200, 6000, or 7000# axle, and if you have the smaller 1-5/8" axle tube, it has the smaller 2000/2200# axle This auction is for a trailer with a 5 bolt, 4.5" bolt pattern!  I stock all sizes, so please check my other auctions or specify you want a different size! It has come to my attention that some axles do not have the small 4 bolt flange welded to it, that is needed to mount the brake backing plate. Below is a picture  If you do not have this, I can furnish the plates, but they must be WELDED on: Note: We offer two different types of brake kits. Basic Kits & Complete KitsComplete Kits are for adding brakes for the first timeBasic Kits are for adding brakes to a second axle or replacing them.  Make sure you double check that you are ordering the right bolt pattern before you pay