CineLog35 V2 Analog FPV Drone-TBS Crossfire Nano RX

CineLog35 V2 Analog FPV Drone-TBS Crossfire Nano RX The CineLog35 V2 Analog FPV Drone - TBS Crossfire Nano RX brings together the expertise and innovations of the GEPRC team, delivering exceptional performance in a compact 3.5-inch cinematic drone. Designed with structural reinforcements, the CineLog35 V2 features a main carbon plate with an injection-molded protection frame, strengthened by 7075 aluminum columns for enhanced durability. The drone’s XT60E1-M power plug is integrated into the carbon plate for convenience, while the O3 Air Unit protective frame includes easy access to the memory card and USB port, streamlining your data transfers. Powered by the F722-45A AIO flight controller and the new SPEEDX2 2105.5 motors, this drone delivers increased power and faster response, perfect for high-performance flying. Whether you’re flying indoors or outdoors, this versatile drone excels in cinematic footage capture, freestyle, and leisure flying. The CineLog35 V2 is built to satisfy all your FPV needs, combining safety, performance, and ease of use Changelog May 8, 2023: CineLog35 V2 motor changed from SPEEDX2 2105.5-2150KV(6S) to SPEEDX2 2105.5-2650KV(6S). September 4, 2023: CineLog35 V2 changed from GEP-M8U GPS to GEP-M10 GPS. CLI Dump for CineLog35 V2: https://geprc.com/downloads/cinelog35-v2/ Feature New appearance design, strengthening carbon plate, hollow design, injection protection frame, noise reduction design, flight safety, silent. Adopts the GEP F722-45A AIO V2 high performance flight controller. Propeller Guard adds memory card and USB ports to O3 Air Unit for easy data reading For O3 camera design independent under hanging shock absorption gimbal, to solve the camera IMU resonance issues, to achieve the optimal anti-shake effect. SPEEDX2 2105.5 motor with HQ DT90 propeller, stable power output, and smooth flight feel. Power cable using XT60E1-M plug and carbon plate integrated design, convenient application. Battery installation method using a tie with 7075 aluminum parts fixed, solid and stable. Carefully tuned 3.5-inch HD cinematic FPV with flexible and delicate flight feeling. Specifications Model: Cinelog35 V2 Analog Frame: GEP-CL35 V2 Wheelbase: 142mm Gimbal Plate: 2.0mm Top Plate: 3.5mm Bottom Plate: 1.5mm FC system: GEP-F722-45A AIO V2 MCU: STM32F722RET6 Gyro: ICM 42688-P OSD: Betaflight OSD w/AT7456E chip ESC: 8Bit 45A VTX: GEPRC RAD 1W(UFL) Camera: Caddx Ratel2 Antenna: GEPRC Peano 5.8 RHCP UFL Motor: SPEEDX2 2105.5-2650KV (6S) Propeller: HQProp D-T90MM GPS: GEP-M10 CineLog35 V2 Analog TBSNanoRX weight: 263.8g Receiver: PNP, GEPRC ELRS2.4G, TBS Nano RX Recommended battery: LiPo 1050mah-1300mah Flight time: 5′00″ -8′ 30″ Includes 1 x CineLog35 V2 Analog 2 x HQProp D-T90MM（2 pairs） 2x M20*250mm battery strap 2 x Battery Silicone Pads 1 x Set of screws 1 x L-shaped screwdriver (1.5mm) 1 x L-shaped screwdriver (2mm) 1 x L-shaped screwdriver (3mm) 1 x M5 wrench 1 x plastic tweezers 1 x Antenna fixed tube (pair) 1 x Keychain 1 x GP Camera Mounting Base 1 x Naked GP Camera Mounting Base 1 x Antenna Mounting Base Screw package includes: 2x cup head screws M2*18 2x round head screws with pad M2*5.5 1x round head screws M2*12 2x Rivet nut M2 4x round head screws M2*8 4x round head screws M2*7 4x round head screws M2*6 2x round head screws M2.5*6 2x hexagonal screw M1.6*8 1x Flange nuts M5 2x Press Rivet Nuts_Brass color M2*1.9-OD4.9 2x Iron nut M2 2x Iron nut M2 2x Camera gimbal shock absorbing rubber Tips: GPS Rescue 4.4 | Betaflight：https://betaflight.com/docs/wiki/archive/GPS-Rescue-v4-4