NOT AVAILABLE: A&J Washroom UG2-A 1-1/4" Grab Bar

The A&J Washroom UG2-A Series Grab BarsItem is Non-Returnable.   Tubing: Fabricated of #18 ga stainless steel with a #4 satin finish. Available in 1 1/4” outside diameter. All bends are formed by an automatic mandrel bending process. All bars maintain a constant 1 1/2” offset.   Finish: Standard finish is a #4 satin finish. For a non-slip finish (peened) add suffix X to model number. (Ex. UG2X-A)   Flanges: Snap flanges are fabricated of 3” diameter, 3/8” deep drawn #22 ga stainless steel with #4 satin finish to match tubing. Flanges have dimples that secure over mounting plate.   Strength: Bars with a 1 1/2” offset clearance will support loads in excess of 900lbs when properly installed. Bars with greater offsets will support loads up to 250lbs when properly installed.   Installation: Before installing grab bars, verify with all state and local codes for requirements on bar diameter and type finish. Recommended mounting heights for grab bars are 33” - 36” centerline above