Toyota Shackle Capture Washer Kit

Having problems with your swing shackle hardware coming loose?  Here is a simple solution to never have to worry about that problem again.   These capture washers are made to fit the M18 hardware used on aftermarket Toyota shackles with a 27mm hex head.  If your hardware has a different size hex and/or you’re using SAE hardware, feel free to email us and we can make you a set to work with your specific hardware.   The kit comes with 4 weld on capture washer and 4 bolt on style capture washers.  The weld on style have flat spots on the outer diameter to allow for 3 1/2" long welds to retain them on the nut side.  The bolt on style tabs are for the shackle bolt heads and will require either a through hole drilled in the shackle or drilling and tapping the shackle plate for a retaining bolt.  We prefer a through hole, since tapping 1/4-20 holes are one of the most disliked chores n the shop.  Once drilled the retainer bolt can be put through and a locking nut can be used for redundancy to