Tried and True Original Finish

Original Wood Finish Application Instructions For all INTERIOR woodworking Apply a very thin coat across entire piece with a lint-free cloth at room temperature. A color change from dry to wet should occur. DO NOT USE A BRUSH TO APPLY! Allow finish to penetrate the wood for a minimum of 60 minutes. Rub in briskly with a lint-free cloth until the surface is completely dry. DO THIS BEFORE YOU LET THE PIECE CURE! Drying/curing issues will occur if this step is ignored! Allow the piece to cure for a minimum of 24 hours. Burnish with a soft cloth or 0000 steel wool BEFORE EVERY COAT (even the first and last.) The more you rub the better it will look. Additional coats will deepen the shine and increase protection. Do not attempt to apply more than three coats of the Original Wood Finish! Care & Maintenance: Use a soft shammy cloth to polish any dull areas. To repair any scratches, nicks, or water marks: Use 0000 grade steel wool to buff out as much of the affected area as possible.