Pit Stop Tuning Kit Snowboard / Ski

The Pit Stop Kit is what you need to get your equipment dialed in and ready to go quickly. The Pit Stop Kit contains:  F-1 All-Temp Rub-On Wax 85g, ceramic stone, durable pouch, edge sharpener, pocket screwdriver, and complete instructions. Rub-On Wax Instructions: 1. Dry base 2. Warm base if possible (easier to wax) 3. Wear a glove for edge protection. 4. Rub Wax into base with pressure. Apply to completely cover. 5. Use cork to polish wax into base. 6. Lightly scrape off (if possible). 7. Lightly brush out or polish to remove extra wax. Waxing, Scraping, Iron Instructions: 1. Select correct temperature specific wax by checking mountain conditions/snow report... (actual snow temperature, not air). 2. Press wax on the iron and distribute small drips of wax over the entire base. DO NOT ALLOW IRON TO SMOKE! 3. With iron in hand, slowly pull the iron over the wax drips smoothing them into a sheet of wax that covers the entire base tip to tail. 4. Let the wax cool 10-15 minutes, then scrap