Capsule Tube & 20 Ring Fit 20mm Coin Holders for 1/4oz Gold Maple Leaf
Capsule Tube & 20 AirTite 20mm Ring Fit Coin Holders for 1/4oz Gold Maple Leaf COINS THAT FIT: 1/4oz Gold Maple Leaf, 1/4oz Gold Kangaroo, Shield Nickels, Gold $2 1/2 (1796-1828), $3 Gold, 1/4oz Gold Nugget, $2.00 Australian, 1/4oz Lunar Gold Series 1, 1/10oz Silver Koala, 1 Ducat, British Farthing, 2 Reichsptennig, 1/10oz Silver Libertad, 1/4oz Noah's Ark, and 1 Ruble DETAILS Package Includes: 20 Coin Capsules of your Ring Color Choice and 1 Capsule Tube of your Lid Choice Capsule Measurements: Inside Diameter 20mm x 2.03mm Depth, Outside Diameter 36.5mm x 5.1mm Depth Tube Measurements: Inside Diameter 36.7mm x Height 4-1/4 inches Capsules are shipping Un-Assembled between layers of foam ABOUT THE PRODUCT The capsule storage tubes are designed to store AirTite coin holders. Choose between a cap or a plug lid. The cap lid closes around the outside of the tube and each lid has a small hole poked in the cap to allow air-flow when removing the lid, and the lid is lubricated for easier use. The plug lid closes inside the tube and does not have an air-flow hole or lubrication. The tubes do not provide any extra protection for the coins, they are only a storage solution. Capsules are PVC free, archival safe, and are made from an acrylic plastic with a non-yellowing agent. This process results in a product that is hard, crystal clear, and smooth to the touch. Our capsules are securely packaged, un-assembled, within layers of foam to protect them during shipment. The Rings are made of an inert cross linked polyethylene. The rings secure the coin in the holder. They will create an additional barrier against air contamination and also presents an attractive border to accent the coin. Ring Type holders are recommended for coins with an odd diameter. We recommend sizing down from your coin's diameter, for example a coin that measures 20.5mm would size down to the 20mm Ring Holder. The inner foam ring will stretch to provide a nice snug fit. Please note, sizing down from the coin's diameter will only apply to Ring Type Holders. This technique will not work for the Direct Fit Holders.