Planet IGS-5225-4UP1T2S Rugged 4-Port PoE Ultra Power Switch 95W/Port 802.3bt

Planet IGS-5225-4UP1T2S Industrial 4 PoE Ultra 95W Ports 802.3bt Managed 2 SFP Please note this is version 4 of the product with a new sleek design enclosure. No Power Supply is included.  Physical Ports 4 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with 802.3bt PoE++ Injector function 1 10/100/1000BASE-T Gigabit Ethernet RJ45 port 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection One RJ45 console interface for basic management and setup 802.3bt Power over Ethernet (PoE Ultra) Complies with IEEE 802.3bt Power over Ethernet Plus Plus Type-4 PSE  Backward compatible with IEEE 802.3at/af PD device Up to 4 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt PoE++ devices powered Supports PoE power up to 95 watts for each PoE port Total of 240-watt PoE budget Auto detects powered device (PD) Circuit protection prevents power interference between ports Remote power feeding up to 100m PoE management features- Total PoE power budget control  - Per port PoE function enable/disable - PoE admin-mode control - PoE port power feeding priority - Per PoE port power limit - PD classification detectionIntelligent PoE features- Temperature threshold control - PoE usage threshold control - PD alive check - PoE schedule Industrial Case and Installation IP30 aluminum case  DIN-rail or wall-mount design 48~56V DC, redundant power with reverse polarity protection Supports 6000V DC Ethernet ESD protection -40 to 75 degrees C operating temperature Digital Input and Digital Output 2 Digital Input (DI) 2 Digital Output (DO) Integrate sensors into auto alarm system Transfer alarm to IP network via email and SNMP trap  Layer 2 Features High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth Storm Control support- Broadcast/Multicast/UnicastSupports VLAN - IEEE 802.1Q tagged VLAN - Up to 255 VLANs groups, out of 4095 VLAN IDs - Supports provider bridging (VLAN Q-in-Q IEEE 802.1ad) - Private VLAN Edge (PVE) - Protocol-based VLAN - MAC-based VLAN - Voice VLAN - GVRP (GARP VLAN Registration Protocol) Supports Spanning Tree Protocol - IEEE 802.1D Spanning Tree Protocol (STP) - IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) - IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN - BPDU Guard Supports Link Aggregation - 802.3ad Link Aggregation Control Protocol (LACP) - Cisco ether-channel (static trunk) - Maximum 3 trunk groups with 3 ports per trunk group - Up to 6Gbps bandwidth (duplex mode) Provides port mirror (1-to-1) Port mirroring to monitor the incoming or outgoing traffic on a particular port  Loop protection to avoid broadcast loops Supports G.8032 ERPS (Ethernet Ring Protection Switching) Compatible with Cisco uni-directional link detection(UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices Link Layer Discovery Protocol (LLDP) Layer 3 IP Routing Features IPv4/IPv6 Layer 3 static routing Supports maximum 32 software static routes and route summarization Quality of Service Ingress Shaper and Egress Rate Limit per port bandwidth control 8 priority queues on all switch ports Traffic classification- IEEE 802.1p CoS - IP TOS/DSCP/IP precedence - IP TCP/UDP port number - Typical network application Strict priority and Weighted Round Robin (WRR) CoS policies Supports QoS and In/Out bandwidth control on each port Traffic-policing  on the switch port DSCP remarking Multicast Supports IPv4 IGMP snooping v1, v2 and v3 Supports IPv6 MLD snooping v1 and v2 Querier mode support IPv4 IGMP snooping port filtering IPv6 MLD snooping port filtering MVR (Multicast VLAN Registration) Security Authentication- IEEE 802.1X Port-based/MAC-based network access authentication - Built-in RADIUS client to cooperate with the RADIUS servers - TACACS+ login users access authentication - RADIUS/TACACS+ users access authentication Access Control Lit- IP-based Access Control List (ACL) - MAC-based Access Control List Source MAC/IP address binding DHCP snooping to filter distrusted DHCP messages Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding IP Source Guard prevents IP spoofing attacks IP address access management to prevent unauthorized intruder Management IPv4 and IPv6 dual stack management Switch Management Interfaces- Console/Telnet Command Line Interface - Web switch management - SNMP v1 and v2c switch management - SSH/SSL and SNMP v3 secure accessSNMP Management- Four RMON groups (history, statistics, alarms, and events) - SNMP trap for interface Link Up and Link Down notificationIPv6 IP address/NTP/DNS management Built-in Trivial File Transfer Protocol (TFTP) client BOOTP and DHCP for IP address assignment System Maintenance- Firmware upload/download via HTTP - Reset button for system reboot or reset to factory default - Dual images DHCP Relay DHCP Option 82 DHCP Server User Privilege levels control Network Time Protocol (NTP) Network Diagnostic- ICMPv6/ICMPv4 remote ping - Cable diagnostic technology provides the mechanism to detect and report potential cabling issues - SFP-DDM (Digital Diagnostic Monitor) SMTP/Syslog remote alarm System Log PLANET Smart Discovery Utility for deployment management