OBD2 16-pin Pigtail Cable

This is a well-made 16-pin pigtail cable to interface your CANable or any other device with your car’s OBD2 port. The cable is approximately 30cm long (1ft; excluding the connector) and the connector is made of a durable molded rubber. Wire color codes are included below. Disclaimer: You can permanently damage your car if you use this cable incorrectly! Be careful. Details Before use, make sure you cut off and/or insulate each individual pigtail wire that you do not intend to use! If you do not do this, you could easily short any number of pins together, causing permanent damage to your vehicle. Even when snipping off unused wires, be sure that there aren’t any exposed strands that could short to any other cutoff wire or metal object in the area. Pinout Pin 1 [red] Pin 2 [white] Pin 3 [orange] Pin 4 [blue] – CAN Ground Pin 5 [green] – Signal Ground Pin 6 [yellow] – CAN High Pin 7 [brown] – KLINE Pin 8 [purple] Pin 9 [red, black line] Pin 10 [white, black line] Pin 11 [orange, blac