FingerTech Flat Bearing Motor Mount (pair) - Bearings Optional

Bearings are now optional.  Add them if using Silver Sparks or N20s.  Do not add them if using Repeat 16mm.   Give your 16mm Spark Motors some outboard shaft support while providing a simple way to mount them to a wall panel. 8 radial holes and symmetric 90 degree mount pattern allows 8 different motor mount angles so you can optimize the motor placement in your layout! Specifications:Height: 22.23mm (0.875in)Width: 22.23mm (0.875in)Thickness: 1.63mm (0.06in)Weight: 1.5grams (0.05oz) each. Optional 3mm Flanged Bearings add 0.33grams (0.01oz) each.Chassis Mounting: Four countersunk 3.45mm (0.14in) holes spaced on a 15.88mm (0.625in) square for as large as 6-32 screwsMotor Mounting: Eight radial 2.44mm holes match the 11mm spaced 2-56 screw pattern on Spark MotorsTwo 3mm shielded flanged ball bearings (Optional)Requires:To mount Spark Motors, use 2-56 x 1/8" screws.To mount Repeat 16mm Motors use M2x4mm screws. To fasten mounts, use 6-32 screws for threaded chassis holes, or #6 Plas