USED LEA Connect 704D 4x700W Digital Power Amp w/Dante

These power amps were installed for about a year and then pulled from a working environment. All power amps had their firmware updated to V3.0.2.15 and include only those accessories shown in the pictures. Pictures are only of one of the units available so the unit you receive may not have the same exact blemishes.  They are all in excellent condition with some scratches and scuffs (like the one pictured), but nothing major.  The power amps have clocked in 247 days or less of being in operation/use. We are an authorized LEA dealer. Warranty does not transfer to the new owner, but rest assured that we have used LEA power amps for years in our installations and these have been tested and determined to be in good working order. If you have any questions, please reach out to us.  Additional information about the units can be found below.   System installers in search of a professional audio amplifier with Dante and wireless networking capabilities will be thrilled with the LEA Professional 704D Connect Series, a 700W 4-channel audio amplifier equipped with a web browser-based user interface that works on any device with no software to download. The amplifier is well suited for small- to medium-scale installations and features direct Hi-Z (70 or 100V) or Lo-Z selectable by channel. Connect via the built-in wireless access point or via venue's Wi-Fi or use the FAST Ethernet to connect to any local area network (LAN) with a standard Cat 5/6 cable. The Dante Connect Series is the first professional amplifier family to feature Cloud connectivity, which allows you to remote control, monitor, get notifications, and more from any personal device. Connect the 704D to a network and start commanding your system from anywhere. Benefits Web browser-based UI works on any device with no software to download Direct Lo-Z and Hi-Z (70 or 100V) selectable per channel Proprietary Smart Power Bridge allows user to bridge a channel to achieve double the power of that channel without sacrificing an amplifier channel 3 ways to connect 1.) Built-in Wi-Fi Access Point 2.) Connects to existing Wi-Fi network 3.) Local area network Ethernet connection 96 kHz analog devices DSP with input routing, multiple 48 dB/Oct crossover filters, 8 parametric EQ filters, user configurable speaker limiters, and real-time load monitoring Universal switch mode power supply with PFC. Operation from 100 to 240 VAC ±15% Analog fully routable inputs External I/O port for remote On/Off and fault monitoring Highly efficient Class D output stage for low AC current draw   AUDIO SPECIFICATIONS INPUTS Analog: 4 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivityDante: 8 x 8 Dante at 96kHz or 48kHz, Multicast or Unicast AES 67: Configurable via the Dante Controller Software THD+N 0.1% (20Hz to 20kHz) FREQUENCY RESPONSE 20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω SIGNAL TO NOISE LEVEL 105dB (20Hz to 20kHz referenced to 8Ω) CROSSTALK 70dB (20Hz to 20kHz) AMPLIFIER OUTPUT CLASSIFICATION Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel DSP DSP ARCHITECTURE Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters INPUT MATRIX Routable matrix; any input to any output with primary and secondary input priority CROSSOVERS Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth) PARAMETRIC EQ 8 Band Parametric EQ per channel OUTPUT DELAY 100ms per channel OUTPUT PROTECTION DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection USER ADJUSTABLE LIMITING Peak Voltage and RMS Voltage LOAD MONITORING Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources CONTROL, MONITORING, NETWORKING USER INTERFACE Web Browser User Interface, 3rd Party API control, or CLOUD control EXTERNAL I/O External I/O In: Toggles Remote On/Off External I/O Out: Indicates Amplifier Health OPERATION AC MAINS 100VAC - 240VAC +/- 15% 50Hz or 60Hz POWER SUPPLY Universal Switch Mode Power Supply with Power Factor Correction PHYSICAL SPEC DIMENSIONS (L X W X H) Product: 14.25” x 19” x 1U (362mm x 482mm x 1U) x 1U (362mm x 482mm x 1U) Shipping: 20” x 22.75” x 3.75” (508mm x 578mm x 95.25mm) WEIGHT 14lbs / 4kg | Shipping: 18.7lbs / 8.5kg COOLING Front to Rear Variable Fan Speed Cooling Fan Noise at idle is 50dB @ 1mFan Noise at 50% is 57dB @1mFan Noise at full speed is 63dB @ 1m