Kingston Memory KSM26RS4/16MEI 16GB DDR4 2666 ECC Reg CL19 1Rx4 Retail
pcpartscenter.myshopify.com
Electronics / Components

Kingston Memory KSM26RS4/16MEI 16GB DDR4 2666 ECC Reg CL19 1Rx4 Retail

$140.24
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

PcPartsCenter

View Store

Kingston's KSM26RS4/16MEI is a 2G x 72-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM) registered w/ parity, 1Rx4, ECC, memory module, based on eighteen 2G x 4-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: FEATURESo Power Supply: VDD = 1.2Vo VDDQ = 1.2Vo VPP = 2.5Vo VDDSPD = 2.25V to 2.75Vo Functionality and operations comply with the DDR4 SDRAM datasheeto 16 internal bankso Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for the banks in the same or different bank group accesses are availableo Data transfer rates: PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600o Bi-Directional Differential Data Strobeo 8 bit pre-fetcho Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop) o Supports ECC error correction and detectiono On-Die Termination (ODT) o Temperature sensor with integrated SPDo This product is in compliance with the RoHS directive. o Per DRAM Addressability is supportedo Internal Vref DQ level generation is availableo Write CRC is supported at all speed gradeso CA parity (Command/Address Parity) mode is supported CL(IDD) 19 cycles Row Cycle Time (tRCmin) 45.75ns(min.) Refresh to Active/Refresh Command Time (tRFCmin) 350ns(min.) Row Active Time (tRASmin) 32ns(min.) Maximum Operating Power (See IDD Specifications) IDD Specifications Symbol 2666 Units IDD0 828 mA IPP0 54 mA IDD1 1044 mA IDD2N 630 mA IDD2NT 900 mA IDD2P 450 mA IDD2Q 540 mA IDD3N 828 mA IPP3N 54 mA IDD3P 612 mA IDD4R 2358 mA IDD4W 2106 mA IDD5R 1098 mA IPP5R 90 mA IDD6N 612 mA IDD6E 828 mA IDD6R 378 mA IDD6A 154.8 mA IDD6A 378 mA IDD6A 558 mA IPP6X 90 mA IDD7 3600 mA IPP7 324 mA IDD8 450 mA UL Rating 94 V - 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC Module Assembly DRAM: MICRON (E-DIE) RCD: IDT Item Dimension (L"xW"xH") 7 x 2 x 1 Weight 1.00 LB Warranty Information Lifetime Manufacture Warranty

Show More Show Less