Audio-Technica AT-VM95ML Dual Moving Magnet Cartridge

Dual Moving Magnet Cartridge with 2.2 x 0.12 mil Microlinear Stylus Fits Half-Inch Mount Turntables The Audio-Technica Consumer AT-VM95ML Dual Moving Magnet Cartridge delivers high channel separation and low distortion for remarkable tonal quality. The cartridge can be mounted to a standard 1/2" mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required). The Microlinear stylus is designed to duplicate the shape of the cutting stylus used to produce the original master disk, enabling it to track portions of the groove other styli cannot reach. The result is an accurate tracking of high-frequency passages and a flat-frequency response within the audible range. The unusual multi-level shape wears more evenly, allowing for extended record and stylus life. All VM95 Series share the same body, allowing the stylus to be replaced with any of the six interchangeable AT-VMN95 replacement styli. The Audio-Technica Consumer AT-VM95ML ships with mounting hardware and a non-magnetic screwdriver.Features: VM Series dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus Aluminum cantilever Durable low-resonance polymer housing Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws - no nuts required Compatible with any AT-VMN95 replacement stylus Specifications: Cartridge & Stylus Frequency Response: 20-25,000 Hz Channel Separation: 23 (dB at 1 kHz) Vertical Tracking Angle: 23° Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) Stylus Construction: Nude square shank Recommended Load Impedance: 47,000 ohms Coil Impedance: 3.3 k ohms (1 kHz) DC Resistance: 485 ohms Coil Inductance: 550 mH (1 kHz) Output Voltage: 3.5 mV (1 kHz, 5 cm/sec.) Output Channel Balance: 1.5 dB (1 kHz) Stylus Shape: 2.2 x 0.12 mil Microlinear Cantilever: Aluminum pipe Static Compliance: 20 x 10 - 6 cm / dyne Dynamic Compliance: 10 x 10 - 6 cm / dyne (100 Hz) Mounting: Half-inch Cartridge Weight: 6.1g Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver Model: AT-VM95ML Mounting Feature: Half-inch mount Recommended Load Capacitance: 100 to 200 pF Replacement Stylus: AT-VMN95ML Stylus Size: 2.2 x 0.12 mil Type: VM Stereo Dual Magnet Weight: 6.1 g (0.22 oz) Wire Used for Coil: T.P. Copper Includes: Audio-Technica Consumer AT-VM95ML Dual Moving Magnet Cartridge Set of Mounting Hardware (4 x Screws and 2 x Washers) Non-Magnetic Screwdriver Limited 1-Year Warranty