Studio Technologies Model 210 Announcer's Console

Audio Control Hub for Announcers, Commentators and Production Personnel The Model 210 Announcer's Console is an audio control "hub" for announcers, commentators, and production personnel. Compatible with essentially all broadcast and production audio system environments, the tabletop unit is often used for on-air sports broadcasting. Flexible SetupTwo pushbutton switches-Main and Talkback-operate under microprocessor control to offer unmatched flexibility and "click-free" audio routing. The Main button controls the main output with operating modes that include push-to-mute (cough), push-to-talk, and latching. The Talkback button controls a dedicated line-level output to provide talent-oriented cue signals to production personnel. For non-on-air applications a special feature set referred to as "production" mode can be enabled. Simple customization of the button labels ensures the user is presented with an easy-to-use set of controls and indicators. Superior AudioFeaturing a studio-inspired low-noise/low-distortion preamplifier design, adjustable gain, and 48 volt phantom power, the Model 210 is compatible with balanced dynamic and condenser microphones. With high output capability and the use of an output transformer expressly designed for professional audio applications, the main output offers broadcast-quality audio as the on-air or other primary audio feed. Powerful MonitoringThe headphone output's circuitry provides high output levels with very low distortion and noise. The user can monitor either or both IFB channels. Each source can be individually assigned to the left, right, or both channels of the binaural headphone output. Two rotary controls allow the user to adjust the headphone output levels. Speedy ConfigurationModel 210 configurations are made using DIP-type switches that are accessible via the bottom of the enclosure. No disassembly is required. An included security panel attaches to the bottom of the enclosure to limit access. Installer FriendlyThe Model 210 can be powered by the IFB input or the supplied external 24 volt DC source. Regardless of the power source used, the console is always fully operational including 48 volt phantom power. Audio inputs and outputs utilize industry-standard 3-pin XLR-type connections. Two spare connector locations are available on the Model 210's back panel. Factory-available assemblies and card kits allow a technician to customize these spare locations to accept a 6- or 7-pin XLR-type headset or to bring remote switch inputs to an XLR connector. A line-level input card kit is also availableFeatures: Microphone preamp with selectable gain and 48 volt phantom power Broadcast IFB input Two pushbutton switches offer programmable "click-free" audio path control Transformer-balanced main output Line-level talkback output Stereo headphone monitoring Two rotary headphone output level controls Microcontroller-directed audio routing Powered by IFB or by external DC source All configuration switches accessible via the bottom of the enclosure Specifications: General Audio: Frequency Response: 20 Hz-20 kHz, +/-0.1 dB, mic in/main out Distortion (THD+N): 0.008%, measured at 1 kHz, mic in/main out S/N Ratio: 80 dB, referenced to -46 dBu mic in/-2 dBu main out Connectors: Mic In, IFB In: 3-pin female XLR-type Main Out, Talkback Out: 3-pin male XLR-type Headphone Out: 1/4-inch 3-conductor phone jack 24 Vdc Power In: 2.1 x 5.5 mm coaxial power jack Spare Connector Locations: 2 Allows one or two Neutrik NC*D-L-1 connectors to be installed (*=3F, 3M, 5F, 5M, 6F, 6FS, etc.) Microphone Input/Preamplifier: Type: electronically balanced Input Impedance: 2 k ohms, nominal Gain Range: 20 to 60 dB, nominal, adjustable in 10 dB steps Compatibility: dynamic or phantom-powered mics Phantom Power: 48 Vdc, nominal, meets IEC 61938 Compressor: Threshold: 2 dB above nominal level Attack/Release Time: 2 mSec/100 mSec, nominal Slope: 5:1, nominal IFB Input: Type: 2-channel, unbalanced (pin 1 common; pin 2 DC with channel 1 audio; pin 3 channel 2 audio) Impedance: 10 k ohms, nominal Nominal Level: -10 dBu Optional Line Inputs: 2 Type: balanced, transformer-coupled Impedance: 10 k ohms, nominal Nominal Level: +4 dBu Main Output: Type: balanced, transformer-coupled Nominal Level: -2 dBu Maximum Level: +20 dBu into 2 k ohms Impedance: 100 ohms, nominal Talkback Output: Type: transformer-coupled with series capacitors and isolation resistors Impedance: 600 ohms, nominal Nominal Level: +4 dBu Maximum Level: +11 dBu (compressor restricts maximum) Headphone Output: 1, binaural (stereo) Compatibility: intended for connection to mono or stereo headphones or headsets with nominal impedance of 100 ohms or greater Type: voltage driver Maximum Output Voltage: 8 Vpp, 150 ohm load Power Sources: IFB: 24-32 Vdc, 105 mA External: 24 Vdc nominal, 70 mA; acceptable range 20-30 Vdc. All units include a universal input/24 Vdc output power supply. Dimensions (Overall): 5.6 inches wide (14.2 cm) 3.3 inches high (8.4 cm) 8.5 inches deep (22.4 cm) Weight: 3.4 pounds (1.6 kg)