Maven Epoxy EA 270 - Slow Set 60-80-Min Epoxy-Medium Viscosity Amber Clear-1:1 ratio

Maven EA 270 is a 2-part toughened epoxy adhesive with the work life of approximately 60-80 minutes. When mixed they produce a tough flexible bond with high impact strength. Bonds wide range of metals, plastics, ceramics and rubber. It can be Machinable. Low shrinkage and good resistance water, wide range of chemicals, and many solvents. EA270 is a popular back-up/substitute material for: 3M DP270  Clear potting compound.  Cured Product Characteristics Color Clear in thin layers Mild Yellow in thick layers Work Life (50 gram mass) 60 - 80 minutes Functional cure 3 - 4 hours Full cure 48 hours Mixing ratio 1:1 Shore D hardness 75 Chemical resistance Excellent resistant to solvents and many chemicals. Directions of applications Wipe off and degrease the surface to be bonded. For maximum bondstrength chemical etching of the surfaces is recommended. Dispense adesirable amount of adhesive using a dispensing dispenser. For maximumstrength apply product on both surfaces to be bonded. A adhesive layerthickness of 0.05 to 0.1mm would give maximum lap shear strength.Join the substrates with in 80 minutes and allow it to cure at roomtemperature. Do not disturb the parts during the curing process. Excessadhesive can be wiped off. Safety and handling Wear safety glasses and gloves. Contains epoxy resin and amine. Keepout of the reach of children. Once used keep the containers closed. Storage and shelf life Store the product between 60-80℉. Shelf life is 15 months from the dateof manufacture, if stored as recommended. For additional product information consult Safety Data Sheet (SDS) and Technical Data Sheet (TDS). Just as us for them.