Permabond MM115 Anaerobic Threadlocker and sealant
Permabond MM115 Threadlocker Anaerobic Adhesive is a medium strength, fast curing, general purpose threadlocker and sealant that is used for locking screws, nuts, and bolts for machinery and equipment manufacturing. It fully cures at room temperature and typically used on zinc, cadmium, steel, and other plated fasteners. It offers corrosion protection, vibration loosening prevention, thread lubrication, and off-torque control. 10 mL Bottle. Typical Use: Used to prevent loosening due to vibration or thermal expansion stresses. Suitable for all metal threaded fasteners. Chemical Composition: Methacrylate esters Color: Blue Components: 1 part Cure System: Anaerobic Cure Time: 10min; Full strength: 24h Dielectric Strength: 11 kV/mm Flash Point: 110 °C Gap Filling: 0.15 mm Key Specifications: MIL-S-46163A Grade CVV, MIL-S-46163A Type II Grade N, ASTM D5363 AN0321 Service Temperature: -55 °C to 150 °C Shear Strength: 1,500 Specific Gravity: 1.1 Thermal Conductivity: 0.19 W/mK Viscosity: 1,300 @ 25 °C Volume Resistivity: 1 x 10^17 ohm-cm