WiFi Shield EiFi Expansion Board - White
www.pfdeal.com
Electronics / Components

WiFi Shield EiFi Expansion Board - White

$32.57
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

pfdeal

View Store

- Quantity: 1 piece- Color: White- Material: FR4- Freadiono WiFi Shield EiFi utilizes a WizFi210 WiFi module to provide your Arduino / Freaduino with Serial Ethernets function. It provides the bridging from TTL serial port communication to IEEE802.11b/g/n wireless communication. So any device with TTL serial ports can easily be connected with this Wi-Fi module and controlled and managed remotely through a wireless network. Different kinds of communication protocols and encryption algorithms are integrated with the module. The Arduino architecture enables you to easily integrate this module into any Arduino based project.- Wi-Fi Chip: WizFi210- Radio Protocol: IEEE 802.11b/g/n compatible- Supported Data Rates: 11 / 5.5 / 2 / 1Mbps (IEEE 802.11b)- Modulation: DSSS and CCK- RF Operating Frequency: 2.4~2.497 GHz- Antenna Options: Chip antenna and U.FL connector for external antenna- Networking Protocols: UDP TCP/IP (IPv4) DHCP ARP DNS HTTP/HTTPS Client and Server(*)- Power Consumption (Typical): Standby: 34.0uA; Receive: 125.0 mA; Transmit: 135.0 mA- RF Output Power (Typical): 8dBm +/- 1dBm- Security Protocols: WEP WPA/WPA2PSK Enterprise EAP-FAST EAP-TLS EAP-TTLS PEAP- I/O Interface: UART SPI(*) I2C(*) WAKE ALARM GPIOs- System Working Voltage: 3.3V- Dimensions(except Antenna): 59 x 50 mm- Support Software/Hardware Serial port communication to Arduino.- The WizFi210's SPI and IIC interface has been connect to Arduino.- The Limited AP Feature support Direct Connection to Iphone Ipad and Android-Phone without AP.- Operates with standard 802.11 b/g/n access points at speed up to 11Mbps (802.11b) and Rich I/O interfaces (SPI UART GPIO I2C ADC JTAG).- Support upgrade Firmware by user you can get the newest Firmware from Wizinet.- Simple AT commands for configuration and data communication- Low power modes alarm input for wake-up- Packing list:- 1 x Wi-Fi shield - EiFi expansion board- 1 x Antenna- 2 x 8 pin female to female header connectors- 2 x 6 pin female to female header connectors- 2 x Short caps

Show More Show Less