PCAN-LIN Interface (low-speed)

This module (low speed) enables users to communicate over CAN, LIN and serial interface. The included firmware enables data exchange between the different bus systems, while configuration software allows setup of different operational modes. For instance, when configured as a LIN master, the PCAN-LIN can request data and send the incoming LIN data to the CAN bus and/or the serial interface. The default bit rate for LIN is 19200 bps. CAN data are directly routed to LIN without offset (offset 0). The Low-Speed version has a max CAN speed of 125 kbps. Features Tech Specs Documents Downloads Sending/receiving LIN 1.x and 2.0 frames The standard bit rate is set to 19200 bit/s for LIN and to 500 kbit/s for CAN Electrical decoupling available between RS-232 and CAN/LIN (maximum 1 kV, optional) Available for use as LIN slave or master / slave General-purpose gateway (or router when using Acceptance Cod