Blue Yarn Nutcracker Ornament Sublimation Blank

This unisub sublimation blank was created solely for using with the transfer that comes with purchase. Finished Size | W 3.2"  H 3.75"  FIND THE MINIATURE ORNAMENTS HERE MDF Unisub - approx. 2.8mm thick (mirror image)   Acrylic Unisub - approx. 4.6mm thick (do not mirror image)   ✔️ Single sided  ✔️ .18" Hole for string/cord ✔️ Comes with blank with transfer ✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides) ✔️ Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut (if this bothers you, you can spray paint the back of blanks before taking protective covering off. Let dry for at least 24 hours before pressing).  PRESSING INSTRUCTIONS for Unisub MDF: Remove all the clear or blue film from the substrate. Remove residue, if any, with a soft damp cloth from unisub MDF. Place your MDF substrate onto your transfer and secure with heat tape or 3M spray. Press for 55-60 seconds @ 380 degrees