Bobcats Mascot Car Charm Sublimation Blank

This unisub sublimation blank was created solely for using with the transfer that comes with purchase. Finished Size | W 4.25"  H 2.99"    MDF Unisub - approx. 2.8mm thick  (MUST BE MIRRORED) Acrylic Unisub - approx. 4.6mm thick (DO NOT MIRROR) ✔️ Single sided ✔️ Comes with blank and transfer (string and bead not included) ✔️ Gloss (clear film) Matte (blue film) Acrylic (clear film both sides) ✔️ Backside of single sided mdf blanks are unfinished and may have some burn marks around the edges due to the nature of being laser cut (if this bothers you, you can spray paint the back of blanks before taking protective covering off. Let dry for at least 24 hours before pressing).  PRESSING INSTRUCTIONS for Unisub MDF: Remove all the clear or blue film from the substrate. Remove residue, if any, with a soft damp cloth from unisub MDF. Place your MDF substrate onto your transfer and secure with heat tape. Press for 50-55 seconds @ 380 degrees medium pressure. (Time and temp may vary based on