Spartan Armor Systems Leonidas Legend Xl Black Multicam Plate Carrier And Ar550 Level III+ Made In U.S.A.

Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA   Product Overview  True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.    Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing.   Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.    Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch      SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SHOOTERS CUT SET OF TWO    Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.     Protective Value Added    We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened   Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.   Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.    Laser Cut to Protect Ballistic Integrity   All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Blazing The Trail of Innovation  Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!   Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Plate Weight (per plate):    9.5”x12.5” AR550 Shooters Cut Single Curve Full Coat = 9 lbs 5 oz.    Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness   Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 6×8 approximately 3lbs 6 oz (base coat), 3lbs 12oz (full coat).    AR550 Body Armor - Shooters Cut Specs:   Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only       See a Comparison of Our Full Line of Body Armor:             Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:       Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.       The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.