AudioControl LC-1.800 And LC-4.800 High-Power Mono Subwoofer Amplifier & 4 Channel Amp With Built In LC2I & Ford Harness

This is my plug & play kit for selected ford vehicles . ONLY POWER AND GROUND NEED TO BE SUPPLIED . THIS INCLUDES A 17FT CABLE TO MOUNT AMP IN THE REAR OF THE VEHICLE .  THIS KIT INCLUDES A LC-1.800 MONO BLOCK AMP  AND A LC-4.800 4 CHANNEL AMP .  LC-4.800 PROVIDES RCA OUTPUT TO CONNECT TO LC-1.800 SO NO EXTRA PARTS ARE NEEDED  When you demand the perfect blend of power and performance, AudioControl provides answers and the LC-1.800 is no exception. No matter the install, you can be assured power will meet and exceed expectations with 800 watts at 2 ohms. The mix of high level and low level inputs mean you have the widest input voltage range in the industry. AudioControl’s patented AccuBASS® circuit is the only way to properly overcome factory bass roll-off and heavily equalized factory bass settings. THIS FITS THE FOLLOWING VEHICLES  2013 - 2020 F150 2017 -2019 F250-350 2013 - 2019 FUSION 2015 - 2019 MUSTANG 2015 - 2018 FOCUS  11  2013 - 2017 ESCAPE  13 2012 - 2015 EXPLORER  2016 - 2018 EXPLORER WITH 6 FT CABLE   2019 - 2020 RANGER WITH 6 FT CABLE   2018 - 2019 EXPEDITION WITH 6 FT CABLE   Making Good Sound Great” is our passion at AudioControl and that legacy continues with the LC-4.800 multi-channel amplifier. This unique high power design features six active speaker level inputs with summing allowing you to interface and integrate with most factory installed source units. The patent pending AccuBASS® circuit compensates for  factory bass roll-off and provides maximum bass performance. More control and features include our GTO signal Sense, Configurable Crossovers and assignable remote level control. We have incorporated years of technology into the LC-4.800 making this a perfect solution based amplifier. FEATURES Configurable as 4/3/2 channel amplifier 4 x 200 watts @ 2 ohms 4 x 125 watts @ 4 ohms 400 watts @ 4 ohms bridged AccuBASS® Processing MILC™ Maximum Input Level Control (Patent Pending) GTO™ Signal Sense Independent Linkwitz-Riley Alignment crossovers Summable active speaker-level inputs (6 channels) for OEM integration 4 preamp inputs 2 assignable preamp outputs PFM Subsonic Filter Optional ACR-1 assignable remote control Solid One-Piece Aluminum Chassis SPECIFICATIONS INPUTS Preamp Inputs: 4 balanced Input Voltage Range: 250 mV – 8 V RMS OUTPUTS Rated Continuous (RMS) Power at 14.4V: 4 Ω – 125 W x 4 RMS 2 Ω – 200 W x 4 RMS Bridged 4 Ω – 400 W RMS Preamp Outputs: 2 Maximum Preamp Output: 8.5 V RMS PERFORMANCE Frequency Response: 10 Hz – 30 kHz Signal to Noise: 102 dBa, Ref 200 W @ 2 Ohm THD+N: < 0.1% Minimum Power / Ground Wire Gauge: 3 AWG wire Fuse Rating: 2 x 40 A Crossover: Linkwitz-Riley, Adjustable From 30 Hz – 300 Hz WEIGHTS & DIMENSIONS Dimensions: 9″W x 7.95″D x 2.1″H Weight: 5.0lbs (2.0kg) In the box: LC-4.800, Speaker connectors, Fuses, Manual, Warranty Enjoy loud, clean and articulate bass combined with the best warranty available with the LC-1.800 amplifier. FEATURES Subwoofer amplifier with patented AccuBASS® 800 watts @ 2 ohms 500 watts @ 4 ohms AccuBASS® Processing MILC™ Maximum Input Level Control (Patent Pending) GTO™ Signal Sense 24 dB/octave Linkwitz-Riley Alignment crossover Speaker level and preamp inputs Optional ACR-1 assignable remote control Solid One-Piece Aluminum Chassis SPECIFICATIONS INPUTS Preamp Inputs: 2 balanced Input Voltage Range: 500 mV – 6 Vrms OUTPUTS Rated Continuous (RMS) Power at 14.4V: 4 Ω – 500 W RMS 2 Ω – 800 W RMS PERFORMANCE Frequency Response: 10 Hz – 30 kHz Signal to Noise: 102 dBa, Ref 500 W @ 4 Ohm Damping Factor: 670 at 10 V, 4 Ohm Output, 100 Hz THD+N: < 0.01% Minimum Power / Ground Wire Gauge: 3 AWG wire Fuse Rating: 2 x 40 A Crossover: 24 dB/octave Linkwitz-Riley, Adjustable From 30 Hz – 230 Hz PFM Subsonic Filter: 24 Hz WEIGHTS & DIMENSIONS Dimensions: 9″W x 7.95″D x 2.1″H Weight: 5.0lbs (2.0kg) In the box: LC-1.800, Speaker connectors, Fuses, Manual, Warranty CLICK HERE FOR USER MANUAL