PolyWise Ultra - Aluminum Oxide

PolyWise Ultra - Aluminum Oxide The PolyWise Ultra - Aluminum Oxide can be used with our PolyWise Ultra product in order to get anti-slip properties and get better abrasion resistance.   Equipment Needed: Aluminum Oxide or Polypropylene Beads, Polyaspartic, Flat-blade squeegee, 18 inch ⅜ knap roller, nitrile gloves, P-100 respirator Aluminum oxide-appropriate grit size, typically 36-240 mesh Polypropylene beads-specific size depending on desired texture, typically 50-100 Polyaspartic topcoat-Polywise Polyaspartic applied at 8mils Procedure: 1. Introduction:  This SOP is going to ensure the proper broadcast of either Polypropylene Beads or Aluminum Oxide into an already rolled out topcoat. This procedure will start with the assumption that the topcoat has already been rolled. 2. Procedure Steps:    a. Once your floor is scraped and you’ve applied the topcoat, immediately fill up a pint cup with whatever grit additive you’re using. About 10 ounces per 100sq ft is adequate but can be a