Ai -75°C 10L Recirculating Chiller with 30L/Min Centrifugal Pump

    The re-designed Ai C80-10 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications. Ai C80-10 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature. IMPORTANT! -75C ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO JACKETED REACTORS ATTACHED). C80-10 circulating chiller features ETL tested to UL and CSA standards No dry ice or liquid nitrogen needed Advanced PID digital temp controller Built-in chilling fluid filter protects the recirculating pump and prevent blockage All steel construction for durability Cost saving as the water consumption is completely eliminated Built-in casters for mobility Plug and play, no assembly required Recommended for Ai 20L jacketed reactors (jacket volume 6L)     Specifications Specifications   Model  C80-10  Working temperature range  -60°C to -75°C (unit is not designed to run at temperature hotter than -60°C)  Electrical requirements  220V 60Hz 1-PH 22A, 4750 watts  Compressor  Make: KK Power: 208-230V 60Hz 1-Phase Number of compressor: two Refrigerant: R404A (2680g) and R23 (710g)  Cooling capacity (assuming working environment is 25°C or 77°F)  @ -40°C:       2000W @ -50°C:       1500W @ -60°C:       1000W @ -75°C:       280W @ -78°C:       180W  Reservoir  Capacity: 10 liters or 2.6 gallons Dimensions: 17.5 x 7 x 8.5 inches (LxWxH) Material: Type 304 stainless steel Chilling fluid connection: 1/2" NPT Drain port: 3/8" barb  Recirculating pump  Pump type: Centrifugal Model: 25PLBR30-10 Pumping speed: 8 gallon/min or 30L/min Power: 280W Pressure: 1 bar  Radiator  Fan motor    Make: Boyoung    Model: YWF 4E-350    Power: 220V 60Hz 0.8A 180W    Rotation speed: 1600rpm    Flow rate: 2500 m2/hour Cleaning    Clean radiator fins with a fin comb every three months  Working environment requirements  Temperature: between 5°C to 35°C Humidity: < 70%  Temperature controller  Digital microprocessor PID controlled Accuracy: +/- 2°C Display unit: Celsius °C  Tempeature sensor type  Pt100  Housing  Powder coated type 42 stainless steel  Built-in swivel casters  Four  Safety  Compressor over-heat protection Short circuit and ground protection Over-current protection Over-voltage protection Over-heat protection  Unit/shipping weight  515 lbs / 615 lbs  Unit/shipping dimensions  38.5 x 25 x 52 inches / 44 x 30 x 64 inches (DxWxH)  Compliance  UL 61010-1 :2012 Ed.3+R:29Apr2016 CSA C22.2#61010-1 :2012 Ed.3  Download   Standard Packages Standard package   Part description  Quantity Part image  Ai C80 recirculating chiller 1 pc  3/8" insulated chilling fluid tubing 11 ft  1/2" NPT chilling fluid on/off valve 2 pcs    1/2" NPT to 3/8" barb adapter 2 pcs  1/2" NPT connector 2 pcs  PTFE sealing tape 1 pc  Brush 1 pc  Users manual 1 pc