2400W Hybrid Solar Inverter 24V 230V PV Panel Max 450V Built in MPPT 80A Solar Charger Controller Pure Sine Wave Inversor

Inverter Use Note: The Battery Capacity OF The Correct Matching System Is Determined According To The Specific Usage Requirements OF The Load And Application Scenarios, Otherwise It will Easily Lead To Insufficient Battery Capacity Or Excessive Waste OF Power Generation.   PowMr 2400W Hybrid Solar Inverter 24V 230V PV Panel Max 450V Built In MPPT 80A Solar Charger Controller Pure Sine Wave Inversor     Overviwe: This is a multi-function inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications. Please read this manual carefully and familiarize yourself with the installation procedures before installation. If you have any questions, please contact me. We have a professional technical team to serve you.   Features: 1.Pure sine wave inverter 2.Configurable input voltage range for home appliances and personal computers via LCD setting 3.Configurable battery charging current based on applications via LCD setting 4.Configurable AC/Solar Charger priority via LCD setting 5.Compatible with mains voltage or generator power 6.Auto restart while AC is recovering 7.Overload/ Over temperature/ short circuit protection 8.Smart battery charger design for optimized battery performance 9.Cold start function 10.WIFI/GPRS(Option) 11.Can connect to lithium battery   Product Details: INVERTER MODEL POW-HVM1.5H-12V POW-HVM2.4H-24V Rated Output Power 1.5KW 2.4KW Input Voltage Waveform Sinusoidal (utility or generator) Nominal Input Voltage 230Vac Output Voltage Waveform Pure Sine Wave Output Frequency 50Hz Low Loss Voltage 170Vac±7V (UPS)； 90Vac±7V (Appliances) Low Loss Return Voltage 180Vac±7V (UPS); 100Vac±7V (Appliances) High Loss Voltage 280Vac±7V High Loss Return Voltage 270Vac±7V Max AC Input Voltage 300Vac Nominal Input Frequency 50Hz/ 60Hz (Auto-detection) Output Short Circuit Protection Circuit Breaker Efficiency (Line Mode) >95% ( Rated R load, battery full charged ) Transfer Time 10ms typical (UPS); 20ms typical (Appliances) Peak Efficiency 91% Overload Protection 5s@ >150% Io ad; 10s@ 110% ~ 150% Io ad Surge Capacity 2* rated power for 5 seconds Nominal DC Input Voltage 12Vdc 24Vdc Cold Start Voltage 11.5Vdc 23.0Vdc High DC Recovery Voltage 14.0Vdc 32Vdc High DC Cut-off Voltage 16.0Vdc 33Vdc No Load Power Consumption <25W <30W Utility Charging Mode INVERTER MODEL 1.5KW 12V 2.4KW 24V Charging Algorithm 3-Step AC Charging Current (Max) 60 Amp Bulk Charging Voltage Flooded Battery 14.6 29.2 AGM / Gel Battery 14.1 28.2 Floating Charging Voltage 13.5Vdc 27.0Vdc MPPT Solar Charging Mode INVERTER MODEL 1.5KW 12V 2.4KW 24V Max. PV Array Power 2000W 3000W Nominal PV Voltage 240Vdc 240Vdc PV Array MPPT Voltage Range 90~430Vdc 90~430Vdc Max. PV Array Open Circuit Voltage 450Vdc 450Vdc Max Charging Current (AC charger plus solar charger) 80Amp 80Amp INVERTER MODEL 1.5KW 12V 2.4KW 24V Safety Certification CE Operating Temperature Range -10°C to 50°C Storage temperature -15°C~ 60° C Humidity 5% to 95% Relative Humidity (Non-condensing) Dimension (D*W* H), mm 348X270X95 Net Weight 10.5kg 10.5kg Link       Battery Four Charging Mode： CSO: Solar energy will charge battery as priority. Utility will charge battery only when solar energy is not available. CUB: Utility will charge battery as priority. Solar energy will charge battery only when utility power is not available. SNU (Default): Solar energy and utility will charge battery at the same time. OSO: Solar energy will be the only charging source even if utility is available. Three Load Working Mode: SOL: Solar energy provides power to the loads as priority, then Battery, then Utility AC power. UTI(Default): Utility will provide power to the loads as priority, then Solar and Battery power. SBU: Battery power load first, then Utility. This PowMr off grid solar inverter all-in-one does not support parallel operation, and does not support phase separation! AC Output Wiring NOTE： Only the Live and Neutral wires will be connected to the Output Terminal Block, the Ground will be connected to the screw terminal. Make sure any circuit breakers are disconnected and ensure the unit is in the off position. AC Output should NEVER be connected to public power/utility or a generator. There are two terminal blocks with “IN” and “OUT” markings. Please do NOT misconnect input and output connectors.