Turtle Case 509D Protective Hard Shell Case

Dustproof, waterproof heavy duty heady glass case with 1/2" cubed pluckable foam. Extra deep case for large bubblers, small waterpipes, rigs, and more. Waterproof ATA certified  Pluckable 1/2" foam cubes to create needed space Weight: 3.55 lbs Inside Dimensions: 9.5" x 7.5" x 7.5" Outside Dimensions: 12.5" x 9.8" x 8.0" Accepts 2 padlocks Dustproof Stainless steel hardware prevents rust Double movement latches prevent accidental opening for added protection Lifetime warranty Color variants stocked in lower quantities Certifications Waterproof  IPX7Dustproof  IP6XImpact  ATA 300 Drop Test  ASTM D-4169 CC-18Vibration  STM D-4169 DC-18Rainfall  ASTM D-4169 DCc-18 Immersion  MIL-STD-810F Descriptions of Tests ATA Specification 300 Category 1Airline transport container suitable for a minimum of 100 airline tripsImpact Resistance Test; samples were exposed to impact using a bar weighing 13.2lbs with a hemispherical end of 3.2cm. Bar was dropped with its longitudinal axis vertical on to each sample’s weakest point from a height of 0.5m. Samples were conditioned to a temperature of -20°C before impact exposure. ASTM D-4169 DC-18Level 1 Schedule A Handling (Manual)Drop tests - a series of drops on each edge, corner and face of the case from a height of no less than 48cm(19”) and with loads of 6.8-31.8kg(15-70lbs) determined by case size. Samples were conditioned at lab ambient conditions and then temperatures of -28°C and +60°C for a minimum of 3 hours at each condition. ASTM D-4169 DC-18Level 1, Schedule F loose load vibrationVibration - The cases are tested using test method D-999 to determine the ability to withstand the repetitive shocks occurred during transportation of loose loads. ASTM D-4169 DC-18Level 1, Schedule H Environmental Hazard RainfallSimulated rainfall for 2hrs at a rate of 10cm/hr (4”). Samples were conditioned to -20 degrees C and +52 degrees C. MIL-STD-810FMethod 512.4Immersion - The case is submerged in a basin of water to a depth of 1 meter (3.28 ft) to the top most part of the case for 30 minutes. The case is heated to 10 degrees F higher than the temperature of the water.IP 67 ingress protection6- Total protection from dust7- Protected against the effects of immersion between 15cm (5.9”) and 1m (39.37”)