Turtle Case 539 Protective Hard Shell Case

Dustproof, waterproof heavy duty heady glass case with 1/2" cubed pluckable foam. Great for medium-large pieces, water pipes, rigs, bubblers, and accessories. Product Features and Benefits Waterproof ATA Impact certified  Pluckable 1/2" foam cubes to create needed space Weight: 7.2 lbs Inside Dimensions: 18" x 13" x 6.9" Outside Dimensions: 19.8" x 16" x 7.6" Accepts 2 padlocks Dustproof Stainless steel hardware prevents rust Double movement latches prevent accidental opening for added protection Lifetime warranty Compatible Locks Turtle Lock - 5020 Turtle Lock - TSA Certifications Waterproof  IPX7Dustproof  IP6XImpact  ATA 300 Drop Test  ASTM D-4169 CC-18Vibration  STM D-4169 DC-18Rainfall  ASTM D-4169 DCc-18 Immersion  MIL-STD-810F Descriptions of Tests ATA Specification 300 Category 1Airline transport container suitable for a minimum of 100 airline tripsImpact Resistance Test; samples were exposed to impact using a bar weighing 13.2lbs with a hemispherical end of 3.2cm. Bar was dropped with its longitudinal axis vertical on to each sample’s weakest point from a height of 0.5m. Samples were conditioned to a temperature of -20°C before impact exposure. ASTM D-4169 DC-18Level 1 Schedule A Handling (Manual)Drop tests - a series of drops on each edge, corner and face of the case from a height of no less than 48cm(19”) and with loads of 6.8-31.8kg(15-70lbs) determined by case size. Samples were conditioned at lab ambient conditions and then temperatures of -28°C and +60°C for a minimum of 3 hours at each condition. ASTM D-4169 DC-18Level 1, Schedule F loose load vibrationVibration - The cases are tested using test method D-999 to determine the ability to withstand the repetitive shocks occurred during transportation of loose loads. ASTM D-4169 DC-18Level 1, Schedule H Environmental Hazard RainfallSimulated rainfall for 2hrs at a rate of 10cm/hr (4”). Samples were conditioned to -20 degrees C and +52 degrees C. MIL-STD-810FMethod 512.4Immersion - The case is submerged in a basin of water to a depth of 1 meter (3.28 ft) to the top most part of the case for 30 minutes. The case is heated to 10 degrees F higher than the temperature of the water.IP 67 ingress protection6- Total protection from dust7- Protected against the effects of immersion between 15cm (5.9”) and 1m (39.37”)