PROZOR 192kHz DAC with Bluetooth 5.0 Transmitter Receiver
PROZOR 192kHz Digital to Analog Audio Converter with Bluetooth 5.0 Transmitter and Receiver 1. Under Bluetooth transmitter, RCA, 3.5 mm and Bluetooth port can output audio at the same time. Under Bluetooth receiver, RCA and 3.5 mm port can output audio at the same time. Built-in a volume control knob, Users can adjust the volume of RCA, 3.5 mm and the Bluetooth headphones. 2. If the Bluetooth is interrupted continuously, please check whether the antenna is fastened tightly. Please note that the antenna is made of plastic. You Can fasten it to avoid falling apart. 3. When using Bluetooth function, please keep your other electronic products away from the converter. It is normal that the Bluetooth will delay within 50ms. 4. Please set your TV's Audio Output to the PCM/LPCM Format. Not Supports 5.1 Channel Such As Dolby and DTS. 5. Not recommended for use with Musical Instruments. 6. Depending on the TV, the TV speaker may be muted when you plug the transmitter into its Optical audio output jack. 7. Support PS5. Specifications: Optical/Coaxial Input Audio Formats PCM Audio Sample Rate 32~192K/24bit Bluetooth decoding format aptX-LL, aptX-HD, aptX, sbc Bluetooth Version 5.0 Version Bluetooth Protocol A2DP, AVRCP Bluetooth distance ≤25m RCA output maximum level 9Vrms 3.5mm audio interface maximum output level 9Vrms 3.5mm audio port maximum output power 32Ω/35mW Maximum working current 5V/100mA Working environment temperature -10~+55°C Storage environment temperature -26~+60°C Working environment humidity 10~90%RH (no condensation) Dimension 90 x 81 x 19.5mm Bare weight 156g Shell material Metal Package Include: 1 x 192KHz Optical to Analogue Converter with Transmitter and Receiver 1 x 1m(3ft) USB Power Cable 1 x 1m(3ft) Optical Cable 1 x Manual 3 Connection Modes Works as EITHER a transmitter or a receiver – NOT simultaneously. Bluetooth Receiver Mode Please note that Under Bluetooth receiver, the Bluetooth connection will overrides the optical and coaxial connection. Please disconnect the Bluetooth source devices when you want to use the other two input interface. We are on our way to upgrade our products. Bluetooth Transmitter This Bluetooth DAC is tested that it can re-pair with Bluetooth devices when using at the second time. Please try to hold on TX1 or TX2 button for 4 seconds to clear pairing record when you fail to connect the headphones.