HDZero AIO5 Whoop Flight Controller - VTX - ESC - ELRS 2.4GHz RX
HDZero AIO5 is the world’s first digital video AIO, enabling bind and fly 65mm whoops to weigh less than19.5g. AIO5 integrates a F4 flight controller, HDZero 5.8GHz digital video transmitter, SPI 2.4GHzExpressLRS 3.0 receiver, DSHOT protocol 4-in-1 ESC, and a 5V/1A BEC. It is ideal for tiny whoop racing and freestyle. The HDZero AIO5 is an excellent collaboration between Happymodel and HDZero. Check out all our Whoop Style AIO Flight Controllers and the rest of our HDZero Products! *Motor plugs included, but must be soldered separately. For Installation and Setup instructions please check the Setup Manual here Specifications: MCU: STM32F411 (100MHz, 512K Flash) Gyro: BMI270 On board voltage and amperage meters Built-in 5A(each) BLHeli_S 4-in-1 ESC MCU: EFM8BB21 HV Current: 5A continuous peak 6A (3 seconds) Factory firmware: O_H_5_48_V0.19.2.HEX Dshot600 ready Built-in 5.8G HDZero VTX RF output: 25mw/200mW Supported channels: R1-R8, F2/F4, L1-L8 UFL connector (ultra-lite linear antenna included) Built-in SPI ExpressLRS 2.4GHz receiver Packet rate option: 25Hz/50Hz/150Hz/250Hz/500Hz Pre-soldered enamel wire antenna Telemetry output power: <12dBm Built-in 5V 1A BEC Flight controller firmware target: CRAZYBEEF4SX1280, configuration file?? Power supply: 1S battery (2.5V – 4.35V) Fully compatible with the popular whoop frames Board size:28.5x28.5mm with a 25.5x25.5 mounting hole size Weight: 5.7g(without motor plugs), 6.3g (with motor plugs) Package Includes: 1 x HDZero AIO5 board 1 x Power cable with inverted angle A30 connector 4 x screws 4 x rubber grommets 1 x ultra-lite linear VTX antenna