NewBeeDrone AcroBee75 BLV5 2S 14000KV ELRS 2.4GHz FPV Whoop BNF
The AcroBee75 BLV5 is the latest in our annual BeeBrain series, showcasing the 5th generation of our flagship flight controller. Every year, we raise the bar by introducing cutting-edge improvements, and the BLV5 is no exception. This powerful 75mm analog whoop pairs the advanced BeeBrain BLV5 flight controller with a robust hardware setup, including 0804 14000KV motors on a 2S power configuration, delivering incredible power and long flight times. Even with a compact 450mAh 2S battery, the AcroBee75 BLV5 achieves an impressive 4:30 minutes of freestyle flight and up to 6:30 minutes of hovering. With a TXCO UART-based ELRS diversity receiver for extended range and a 400mW VTX featuring smart power control, this whoop is de signed to provide stable connectivity and performance, making it the perfect companion for outdoor adventures. Check out all the Micro BNFs and the rest of our NewBeeDrone Collection. Features: Upgraded BeeBrain BLV5 Flight Control: STM32G474 MUCDouble N-MOS 1 Channel 18A Running Z-H-40 - Bluejay 0.19.2 48KHzTCXO Crystal Oscillator ELRS 2.4G Diversity receiver Non-PIMPU6000 Gyro Smart-Max VTX Power Control Technology Intelligent Smart-Max Power Control: Smart-Max technology dynamically adjusts VTX power output based on real-time temperature monitoring to prevent overheating and protect your VTX hardware. It automatically reduces power when needed and boosts output to 400mW when temperatures allow, ensuring maximum signal strength and stable video transmission. Features a 3-level power switch: 25mW (Short-range flying)100mW (Medium-range flying)400mW (Long-range flying) Smart-Max Brushless Motor: Flow 0804 14000KV Brushless MotorLongevity and enhanced powerGreat for 1S and 2S battery setups Fly with Confidence: Includes accessories to improve durability (prop guards)TCXO Crystal Oscillator ExpressLRS dual-antenna receiver delivers rock-solid signal transmission, making it perfect for any flight environmentNewBeeDrone Cockroach75 frame with a lifetime warranty, designed to withstand the toughest conditions and provide long-lasting performance. High-Performance Camera: Runcam Nano4 Camera with Goober Canopy V2, ⅓ inch sensor offering enhanced low-light performance and better protectionAdjustable angle for different flying styles Unleash Your Power: Carbon Fiber Baseplate provides the most robust frame performanceSturdy design for freestyle flying or racing Ready to Fly: Professionally tuned PID settings for out-of-the-box performance, allowing you to fly confidently right from the start.No need for additional setup—just power up and take off! Compact Size: 75mm frame sizeWeight: 36.4g (without battery)Fits standard 1S and 2S batteries Enjoy longer flights with high-capacity battery 2S 550mAh: Up to 6mins 30s Flight time Up to 7mins 30s Hovering Time 2S 650mAh: Up to 7mins 30s Flight TimeUp to 9mins Hovering Time 2S 850mAh: Up to 9mins Flight TimeUp to 11mins Hovering Time The flight time was measured under ideal conditions and may vary depending on actual flying habits and environment Specifications: BLV5 Flight Control Specs: MCU: STM32G474 216MHz Gyro: MPU6000 VTX: 25mw/100mw/Smart-Max(400mw) Camera: Runcam Nano 4 800TVL ESC: Double N-MOS 1 Channel 18A Running Z-H-40 Bluejay 0.19.2 48KHz Motor Plug: JST-1.0 3Pin Receiver: Built-in TCXO Crystal Oscillator ExpressLRS 2.4GHz Diversity Receiver(Uart Base) Flight Control Weight: 5.8g Flight Control Size: 29x29x7.6mm 25.5x25.5mm Battery Input: 1s-2s Drone Specs: Drone Size: 75mm Frame: NewBeeDrone 75mm Cockroach75 Brushless Extreme-Durable Frame& Carbon Fiber Propeller: NewBeeDrone Azi 40mm (Tri-Blade) Micro propellers Flight controller: BeeBrain BLV5 flight controller Motors: Flow 0804 14000KV Brushless Motor Camera Mount: Goober Canopy V2 Camera: Runcam Nano 4 Recommend battery: Tattu 2S Battery 2S 550mAh 2S 650mAh 2S 850mAh Power Connector: XT30 Additional Features/Notes: Designed for ease of use and adaptability, allowing different power settings and battery configurations for varied flying conditions. Battery mount 3D Printed file: Download ELRS 3.X Receiver Binding Instructions Power On the Receiver: Connect the receiver to a USB port or power it on three times. The blue indicator LED will start a double-blink pattern, signalling that it’s ready for binding. Ensure you are using firmware version 3.x to enable successful binding. Prepare Your Remote Controller: Ensure that your remote controller is running ELRS 3.x firmware. Start the Binding Process: Once the LED on the receiver begins double-blinking, proceed with the binding process on your remote controller. Make sure both devices are running compatible firmware versions to ensure a smooth binding process. If you mess up the setting? Important Notice: If you experience issues with your drone, DO NOT flash the firmware. Simply perform a factory reset using the configuration tool (e.g., Betaflight Configurator) and then do an accelerometer calibration. For further assistance, please contact our support team at support@newbeedrone.com Firmware: Download Package Includes: 1 x AcroBee75 BLV5 Drone 1 x NewBeeDrone Azi 40mm (Tri-Blade) Set 1 x Accessory Pack (spare screws + nylon zip ties) 1 x User Manual