EMAX F3 Magnum Mini FPV Stack Tower System Flight Controller 4in1 12A ESC All in One For Micro FPV Racing Quadcopter DIY RC Hobby Models
EMAX F3 Magnum Mini FPV Stack Tower System Flight Controller 4in1 ESC All in One For Micro FPV Racing Quadcopter DIY RC Hobby Models Designed for high performance Micro FPV racers, the F3 Magnum Mini packs in a F3 processor, Betaflight OSD and 12A 4 in 1 ESC that can handle up to 4s batteries. MPU6000 gyro is a proven performer for stable flight and resistance to vibration noise. The FC and ESC with neatly stack together with pinned interconnects that make your build easy to assemble and cleaner looking. This tightly pre-assembled package will fit any frame that has 20 x 20mm mounting hole spacing. The F3 Magnum Mini is the fastest way go from starting a new micro build to FPV Flight! 4 in 1 Main Board - F3 FC + Betaflight OSD + 5v Regulator + Buzzer The heart of the flight control systems is a powerful STM32F303 MCU and MPU6000 gyro flashed with Betaflight for proven rocksteady flight stability. The integrated 5v/3A voltage regulator means clean power for all the FC/OSD components and other attached boards such as VTX, RX and FPV Camera. Betaflight OSD with easily customizable layout of vital flight information and ability to change FC flight parameters. On board buzzer for battery level warning or lost model finder functions. BLheli S 12A - 4 in 1 ESC The ESC system is comprised of 4 x 12A continuous Bullet ESC’s using top quality MOSFETs and EFM8BB21F16G MCU. Run your choice of protocol: DSHOT, Multishot, Oneshot 125. Instruction Manual: CLICK HERE Specifications: 4 in 1 Flight Controller Main Board OMNIBUSF3 Betaflight Target STM32F303 MCU MPU6000 accelerometer/gyro (connected via SPI) On-board Betaflight OSD On-board Buzzer Integrated 5V/3A BEC Dedicated PPM/ Sbus receiver input and 3.3V Pad for DSM Sat RX’s Addressable LED pad 24x24mm board with 20mm mounting holes 4 in 1 ESC and Current Sensor Board Continuous current 12A and 15A Burst(within 5 seconds) Supply voltage 2-4S Lipo EFM8BB21F16G 50mhz MCU BLHeli-S firmware supports DSHOT up to 600, MULTISHOT, ONESHOT125 Top quality MOSFET 3oz high TG PCB board 24x25mm board with 20mm mounting holes Included in package: 1pc - F3 Magnum Mini FC + OSD Board 1pc - Magnum 12a 4 in 1 ESC Board M2 Mounting hardware Printed Manual F3 Magnum Mini Selling Points. -Stackable F3 Flight controller + ESC tower system for Micro FPV Racer with 20x20mm hole spacing. -BLheli S 12A 4 in 1 ESC - Oneshot, Multishot & DSHOT - 2-4S battery ready. -Betaflight OSD for easy PID running and display of flight time/voltage. -Built in Buzzer for lost model finder and low battery warning.