FullSpeed MiniPusher Cinewhoop Brushless FPV Racing Drone w/ Crossfire Nano/FD800 Mini Receiver for insta 360 go Action Camera

FullSpeed MiniPusher Cinewhoop Brushless FPV Racing Drone w/ Crossfire Nano/FD800 Mini Receiver for insta 360 go Action Camera Packing list: MiniPusher FPV Racing drone kit x 1 Crossfire Nano Receiver x 1(optional) FD800 Receiver x 1(optional) LiteRadio 8CH?remote control x 1(optional) MiniPusher RC Drone Specification: Brand Name:?FullSpeed Item Name:?MiniPusher Weight: 83g (without battery) Flight controller:?NameLessRC AIO412T£¨F411 2-4S£©?5V 2.5A BEC ?built-in OSD?BLHELI_S?4in1 ESC Dshot600 Motor:?rcInpower?1204 5000KV with connector Propeller:?Gemfan D63 3-blades props Camera:?Caddx EOS2 camera VTX:?Nano400 VTX?Pit/25/100/200/400?switchable VTX£¨support IRC Tramp£© ? FD800 Tiny 8CH SBUS / PPM Receiver: Description: Item Name: FD800 Tiny Frsky Receiver Work mode: D8 Mode Output: PPM/SBUS?(can be choose) Number of channels: 8 Working voltage: 5V Range: Approx 500m Weight: 1g Dimensions: 17x12x5mm Feastures: ? Compatible with FRSKY ACCST ? Compatible with X9D(Plus)DJT/DFT/DHT ? Small and light weight ? With Bind botton, easy operation ? Suit for Eachine Tiny QX90, QX95, QX80 Micro Racing Quadcopter. ? Bind with the transmitter: 1.Turn on the transmitter , select D8 mode for the Receiver ? 2.Power for the Receiver(You can power from a 5V battery or connect to the flight controller with +5v output) while holding the binding button, the Green LED will get be solid, this indicates the receiver get into the binding mode. 3.Go to the Receiver [Bind] option, and ENT to Bind with the receiver, The transmitter beeps,And the green LED on the receiver will turning off, this indicates that the bind process was successful? Reconnect the battery ,the GREEN Led on the receiver will solid again, the receiver works normal Indicator Description: Green Steady : it indicates the normal operation mode or the frequency mode Slow green: The remote control signal is lost Steady and Off: Binding Sucessfully ? Output: PPM or SBUS?(can be choose). Please send note with output you want. Default-random. ? Feichao LiteRadio 2.4G 8CH Radio Transmitter Remote Controller -Supports Frsky protocol, easily change Frsky D8, Frsky D16 FCC and Frsky D16 LBT mode (The default version is Frsky D16 FCC) -Built-in charging module, support USB charging? -Adopted the rubber coat and add weight, makes it more ergonomic -Add vibration motor, provide a vibrating prompt -Redesign the power button, make it crystal clear and better for the LED indication ? Specification: Brand: FEICHAO Item: LiteRadio Frequency Range: 2.4G (2403MHz-2447MHz) 2.4G System: NRF24L01 or CC2500 Channel: 8 System: Frsky Protocol? Power: 80mw Model Type: Multi-rotor Support USB Charging Support FPV Simulator Connected Output: PPM, support Student Radio Mode LED Light: Green-Power On / Red-Warning / Blue-Normal Battery: 350mAh 2S Battery Weight: 227.4g (with battery) ? How to change the protocol (D16/D8 Version): To change FrSky protocols (FCC D16, EU D16, or D8), you first have to power it off, then press and hold the bind button while you power it back on. Then it will flash the code to indicate which protocol it is on.? LED Status - Protocol Version:? ? ? Flash Once - Frsky D16 FCC;? Flash Twice - Frsky D16 LBT;? Flash Three Times - Frsky D8 ? LiteRadio Guide Manual for LiteRadio Radio Transmitter LiteRadio Configuration - OpenTX Companion Setup E.G. #1 - Trim the Gimbal Central Value ? ? ? ? ? ? ? ? ? ? ?