QWinOut DIY FPV Drone W/ AT9S TX RX S600 4 axle Quadcopter APM 2.8 Flight Control GPS 7M 40A ESC 700kv Motor 4400MAH Battery Full Set
Package Listing : 1x S600 4-Axis Rack Quadcopter Frame Kit *1 4x 40A Brushless ESC Speed Controller 4x HYD 3508 700KV Motor 2 Pairs x 15x5.5 3K Carbon Fiber Propeller CW CCW 1x APM2.8 Flight Controller 1x GPS Module with Compass 1x AT9S Transmitter 1x IMAX RC B3 Pro Compact Balance Charger *1 1x11.1V 4400MAH 30C 3S1P T Plug Battery *1 APM2.8 APM 2.8 No Compass Flight Controller Board Features: - Arduino Compatible! - Can be ordered with top entry pins for attaching connectors vertically, or as side entry pins to slide your connectors in to either end horizontally - Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer - Onboard 4 MegaByte Dataflash chip for automatic datalogging - Optional off-board GPS, uBlox LEA-6H module with Compass. - One of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer/Gyro MPU-6000. - Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties. - Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively. 1. data transmission port 2. analog sensor port 3. autostability gimbal output 4. ATMEGA2560 SPI online programming port (be useful for optical flow sensor) 5. USB port 6. remote control input 7. function selection jumper 8. GPS port 9. 12C external compass port 10. ATMEGA32U2 SPI online programming port 11. multifunction configurable MUX port (OSD is the defaulted output) 12. current voltage port 13. ESC power supply selection jumper 14. ESC output port Radiolink AT9S 2.4G 10CH DSSS FHSS Transmitter R9DS 9CH Receiver Radio Controller S-BUS PWM AT9S Specification 1. Size: AT9S- 183*100*193mm, R9DS- 41*23*14mm 2. Weight: 0.88kg 3. Frequency: 2.4GHz ISM band (2400MHz to 2483.5MHz) 4. Modulation mode: QPSK 5. Channel bandwidth: 5.0 MHz & 250Kbps 6. Spread spectrum: DSSS ;FHSS 7. Adjacent channel rejection: >38dbm 8. Transmitter power: <100mW (20dbm ) 9. Operating current: <90mA 12V 10. Operating voltage: 7.4 ~ 18.0V 11. Control distance: more than 900 meters ground, 1500 meters air, the actual control distance depends on the flying environment 12. Channel: 10 channels, 5-10 channels are customized 13. Compatible model: include all 120 degree and 90 degree swash-plate helicopter, all fix wings, glider and multi-rotor 14. Simulator mode: under the simulator mode the transmitter action turn off, change to power saving mode 15. Screen: 2.8 inches 16 colorful screen, 240*320 pixels 16. Support receivers: sells with R9DS (SBUS;PWM) ;Also support R10DS(SBUS PWM) and R6DS(SBUS;PPM;PWM)