AiM Water M5 PT 100 thermoresistor

The built AiM devices for car/bike applications can measure and sample water/oil temperature using a sensor (thermo resistor) placed in the cooling system/oil sump. The thermo resistor must be placed in the cooling system/oil sump. It is recommended to install the sensor far from heat and electromagnetic interference sources (like RPM cable or lap receiver cables). The draws here below show the sensors dimensions on the left and the inline water/oil fitting dimensions on the right in millimetres [inches] (PT100 M10, upper images; PT100 M5, lower images). Sensors end with 4 pins male 719 Binder connector that features a 2kΩ 1% resistor between pins 1 and 4. Here below you see the connector pinout solder termination view as well as the connection table. The sensors technical characteristics are: Temperature working range: 0/150°C cable sensor length: 250 mm These sensors are sold with a 25 cm cable and standard lengths extension cables are available as optional.Extension cables part