HappyModel BNF Mobula8 1-2S HD 85mm Whoop w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz

Experience powerful performance with the HappyModel BNF Mobula8 1-2S HD 85mm! This amazing quadcopter comes with an amazing DJI O3 Air Unit and Micro Cam, as well as Crazy F405 ELRS HD flight controller, EX1103 11000Kv motors, and Gemfan Hurricane 2023 tri-blade propellers for superior power performance. Get the perfect HD experience with the Mobula8!  Be sure to check out all our pre-built quads, and all our Happymodel products! Specifications Camera/VTX: DJI O3 Air Unit Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone Size: 120mmx120mmx50mm Brand Name: Happymodel Wheelbase: 85mm FLIGHT CONTROLLER Built-in voltage meter sensor, voltage meter scale 110 Built-in current meter sensor, current meter scale 470 MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH) Power supply: 1-2S battery input (DC 2.9V-8.7V) GYRO Sensor: BMI270  (SPI connection) Built-in 12A(each) Blheli_S 4in1 ESC Mount hole size: 25.5mm x 25.5mm Built-in Serial ExpressLRS 2.4G Model: Crazy F405 ELRS HD Built-in BMP280 Barometer Built-in 8MBp black box ONBOARD UART ELRS 2.4GHZ RECEIVER Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz Could update firmware via ExpressLRS configurator Antenna: enameled copper wire 31mm length Default firmware version: ExpressLRS V3.0.1 Firmware target: HappyModel EP 2400 RX Telemetry output Power: <12dBm RF Frequency: 2.4GHz ONBOARD 4-IN-1 ESC Current: 12A continuous peak 15A (3 seconds) Factory firmware: Bluejay ESC V0.19 Support BLHeli_S Bluejay firmware Power supply: 1-2S LiPo/LiPo HV Default protocol: DSHOT300 Firmware target: Z-H-30 MOTORS Motor Dimension(Dia.xLen):Φ13.5mmx15.5mm Mode: EX1103 11000Kv Shaft Diameter:Φ1.5mm No.of Cells(Lipo):1-2S Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Weight(g):3.8g PROPELLERS Center Hole Dia:1.5mm Center Thickness:5mm Props Dia:52.17mm Weight:0.88g Pitch:2.3inch Material: PC Includes 1x HappyModel BNF Mobula8 1-2S HD 85mm w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz