Lumenier LUX HD G4 AIO Whoop/Toothpick Flight Controller (w/ 35A AM32 4in1 ESC) - Solderless
The Lumenier LUX HD AIO G4 Flight Controller + ESC is a powerful solderless AIO ready to power the DJI O3 in a simple configuration. The LUX HD AIO G4 builds on all the best features of its predecessors and further improves on hardware components and layout, and is now dedicated to a design for the DJI systems. The FC uses a G4 processor and top-of-the-line hardware from the 35A AM32 3-6S ESC powered by four F4 processors! This LUX HD AIO G4 comes in a standard 25x25 mounting pattern, weighing just under 13g. The solderless design has plugs installed for your motors, XT30 connection, and more... which gives you the choice to solder or just plug in and fly. Unleash the capabilities of your FPV Racing Quadcopter with the Lumenier LUX HD AIO G4 Flight Controller! Note: This AIO works with both the DJI O3 and other Digital FPV Systems. This AIO is also Analog compatible. Check out our other AIO boards as well as our Lumenier product selection! Features Solderless Version (includes motor plugs + pre-soldered XT30 power cable) Low resistance Mosfet with a Metal case, up to 6s 35A supported Analog current sensor3~6S Lipo (12.6~25.2V) Input 16M Flash Memory Blackbox 25x25mm Mounting Pattern G473 Flight Controller OSD (Analog / Digital) ICM42688 Gyro 35A AM32 ESC DJI Ready Specifications MCU: STM32G473 / 170Mhz / 512KB Flash BEC: 2x BEC, 5V and 10V, 2.5A each VBAT Input: 8-32V, 3-6S Lipo Blackbox: 16MB (128M Bit) MOSFET: Low resistance Amperage: 35A up to 6S Current sensor: Analog Dimensions: 36x36mm ESC MCU: F4 AM32 DJI Digital Port: Yes Gyro: ICM42688 LED: WS2812b FC MCU: G473 PMW Output: 4 Weight: 10.3g Beepers: Yes OSD: Yes 12C: 1 Downloads Lumenier LUX HD AIO - G4 ManualDownload the LUX HD AIO-G4 .hex file for Betaflight 4.5.0 (comes pre-installed on the board) Includes 1x Lumenier LUX HD G4 AIO Whoop/Toothpick Flight Controller (w/ 35A AM32 4in1 ESC) - Solderless 1x 5-Pin Micro JST Cable 1x DJI Plug-N-Play Cable 1x 220uF 25V Capacitor 1x XT30 LiPo Pigtail 1x 4-Pin Micro JST 1x Hardware Set Wiring Diagram