
NewBeeDrone BeeBrain BLV4 F411 1-2S AIO Whoop/Toothpick Flight Controller w/ 12A 8Bit 4in1 ESC & 400mW VTX - CRSF
The NewBeeDrone BeeBrain BLV4 F411 1-2S AIO Whoop/Toothpick Flight Controller provides optimal performance for pilots who want a compact build. This single board is equipped with a flight controller, 12A 32Bit 4in1 ESC, 5.8GHz VTX, and a TBS Crossfire receiver, all on a 29x29mm platform. Enjoy advanced features and excellent performance for your compact setup! The new "Smart Max" technology uses the MCU to read the board temperature on the back of the VTEC chip and uses PID control to control the output power of the VTX amplifier. When the board temperature rises, the VTX power will be automatically reduced. When the temperature is low, the maximum output power can be up to 400mW. Check out all our Whoop/AIO Flight Controllers and the rest of our NewBeeDrone products. Features Built-In TBS Crossfire Nano Receiver SmartMAX (SmartMax up to 400mw) 25x25 Mounting Pattern 5w/25w Switchable VTX F411 Flight Controller 12A BLHeli_S ESC 1-2S Voltage BMI270 Gyro Specifications MCU: STM32F411 GYRO:BMI270 VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw) with BeeTX 5.8Ghz Antenna ESC: 12A BLHeliS Pre-Flash with Bluejay 0.18 target: S-H-40 48kHz ESC Connector: JST-1.0 3Pin OSD: NBD7456 Graphical OSD compatible with Betaflight OSD Receiver: Crossfire Nano receiver with MINIMORTAL T ANTENNA Flight Controller Weight: 6.5g(Include antennas and battery connector) Flight Controller Size: Outer dimensions: 29x29x7.6mm Flight Controller Holes: 25.5x25.5mm Battery input: 1-2S (For 2S you will need to set throttle cap at less 50%) Uart2: Crossfire Nano receiver Power Connector: NBD-PH2.0 connector Additional Information UART2 TX and RX for onboard Crossfire (CRSF) UART1 TX and RX free VTX Adjustable power 5mW-25mW-SmartMAX. SmartMAX will automatically adjust the VTX power according to the board temperature. When the board temperature rises, the VTX power will be automatically reduced. When the temperature is low, the maximum output power can be up to 400mW. Firmware Download: BeeBrain BLV4 CRSF Betaflight 4.4 firmware Includes 1x NewBeeDrone BeeBrain BLV4 F411 1-2S AIO Whoop/Toothpick Flight Controller w/ 12A 8Bit 4in1 ESC & 400mW VTX - CRSF 4x Grommet 4x Screw 1x Receiver T-Antennas 1x Receiver Mono Pole Antenna 1x VTX Antenna Wiring Diagram